Landscape Body Truck Bodys For Sale Near burlington, Massachusetts

<p><strong>IN STOCK</strong>, 11FT TO 12FT GEN2 SWITCH-N-GO HYDRAULIC SYSYTEM -</p><p>11FT - 16,595.00 - IN STOCK</p><p>12FT - 18,395.00 - IN STOCK</p><p><strong>** PICKUP OR SHIP SYSTEM TO YOUR LOCATION FOR INSTALL</strong></p><p><strong>Hoist System Specifications</strong> • Now includes 15-gallon steel hydro tank with filter • Model - 18" hoist overhang • Powder coated carbon steel construction • Available in 15,000 or 18,000 (lbs.) winches • Full hydraulic - hydraulic scissor hoist & industrial winch • Includes a high-pressure in-line filter.</p><p><strong>Requirements/Recommendations</strong> • The 18” body overhang retains a greater dumping capacity with a variety of system capacities • Requires minimum hose size (1/2” diameter pressure line, 3/4” diameter return line) • Recommended for unlimited lifts per day • Requires a hydraulic pump providing 3000 psi @ 12-15 GPM • Requires hydraulic installation kit components (included) • Requires either an under-hood clutch pump* or "live drive" style PTO, allowing operation in any gear</p>

<p><strong>IN STOCK</strong>, 11FT TO 14FT GEN2 SWITCH-N-GO ELECTRIC SYSYTEM -</p><p>11FT - 14,795.00 - </p><p>12FT - 15,895.00 - IN STOCK</p><p>14FT - 15,995.00 - IN STOCK</p><p><strong>** </strong>INSTALL AVAILABLE WITH LED LIGHTING, ICC BAR, HITCHES, STROBE LIGHTING, FENDERS, UNDERBODY BOXES, ETC,</p><p> <strong>Hoist System Specifications</strong> • Model - 18" hoist overhang • Powder coated carbon steel construction • Available in 15,000 (lbs.) winches • Electric over Hydraulic - hydraulic scissor hoist & electric industrial winch</p><p><strong>Requirements/Recommendations</strong> • Requires installation of heavy duty alternator (minimum 150 AMP) • Requires installation of minimum two deep cycle batteries (minimum 750 CCA) • Requires installation of 600 AMP ANL Fuse (included) • Requires electric installation kit components (included) • The 18" body overhang retains a greater dumping capacity with a variety of system capacities • Recommended for up to 6 fully loaded lifts per day</p>

<p><strong>IN STOCK,</strong> 11FT SWITCH-N-GO DIAMOND-PLATED FLATBED, STAKE POCKETS, RUB RAIL AOUND ENTIRE BODY, (4) TIE DOWN HOOKS, OVER 100+ BODIES IN STOCK AT ALL TIMES, WINDER, GA…</p><p>11FT - 5,950.00 IN STOCK</p><p>— Structural steel construction with zinc prime & powder coated finish — Body widths are 90" for the deck and 94.5" outside — Inside bulkhead heights are high visibility in 39" or 51" — Body lengths include 1' beavertail, bodies without beavertail will receive stake pockets on rear — Floors on 9' to 12' are constructed with 1/8" steel diamond plate — Floors on 13' to 15' are constructed with 3/16" steel diamond plate — Crossmembers are constructed with 3" structural channel on 16" centers — External stake pockets are constructed on 24" centers with 3/8" x 2" flat bar rub rail — Chain tie-down key holes in floor at the four corners — Beavertail bodies receive integrated steel 4" steel ground rollers or no beavertail bodies receive standard 6" steel ground rollers</p><p> </p>

RUGBY 14'X96X48 STEEL LANDSCAPE DUMP W/SIDE DOOR W REAR BARN DOORS

96" x 14' 6" Landscape/Trash Bodies, Curbside Door 50", 48" weld-on sides w/ Barn door style rear doors, LED marker light kit w/ wiring harness, 36" Cab Shield, 05" Rise, 63" high from bottom of long sills, w/ D-rings, 1 per corner, Champion, CS 620T Electric Double Acting Hoist Kit, Model CS620T EMDA Hoist w/ Push Button Controls Includes 5" SH Subframe set at a 50-degree dump angle, 146" Subframe Length for 132" WB Cab-over chassis, Dump Body PREINSTALLED on Electric Subframe Hoist Includes; Chassis Mounting & Mud flap Brackets, 12-volt pump kit installed with Hoses plumbed to cylinder, Battery cables w/ resettable fuse on red cable, Cables attached to pump and rolled up in subframe, Oil in tank, & hoist tested! Manual Tarp Roller Kit, 7.5 ft. x 18 ft. long Installed on Body w/ Rear Anti Sail Pull Bar Kit

2024 CADET, 14 FT, Medium Duty Trucks - Truck Bodies Only - Flatbed, , , NEW Cadet Grassmaster 14' X 96" wide Steel Flatbed with Ramp - 1/8" Treadplate Steel Floor - 3" Structural Channel Crossmembers, 4" Longsills - 60" Header with 24" x 24" Storage Compartment - 4' Dovetail with Expanded Metal Overlay (Dovetail Not Included in Length) - 17" Hinged Sides - 2 - Piece, 6' Spring Assisted Ramp - Black Polyurethane Paint, All Weather Under- Coating - Approx Weight 2160 lbs., Horse Power, Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN

2024 CADET, 16 FT, Medium Duty Trucks - Truck Bodies Only - Flatbed, , , NEW Cadet Grassmaster 16' X 96" wide Steel Flatbed with Ramp - 1/8" Treadplate Steel Floor - 3" Structural Channel Crossmembers, 4" Longsills - 60" Header with 24" x 24" Storage Compartment - 4' Dovetail with Expanded Metal Overlay (Dovetail Not Included in Length) - 17" Hinged Sides - 2 - Piece, 6' Spring Assisted Ramp - Black Polyurethane Paint, All Weather Under- Coating - Approx Weight 2320 lbs., Horse Power, Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN

New CM RD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-03976034SD. Weighs approx 1100 lbs. Serial # MB00402349. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM ALSK-DLX Flatbed body only, 9.3' long x 94 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), Deluxe, SD, Taller 2FTB (TM style), 2RTB, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALSK-03946034SD-DLX. Weighs approx 821 lbs. Serial # MV00396629. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Dually Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALSK-DLX MODEL: Aluminum full length skirt w rolled fenders & ATP trim Steel frame construction Qty 4 Aluminum Toolboxes - (2) Standard Integrated in Rear and (2) Tall Vertical Integrated in Front (36 inches wide) 4 chrome T-handle twist compression latches, lockable, flush integrated 11.3&apos; Models may include MEGABOX toolbox configuration (54 inches wide w suicide doors) - or - (4) Standard Integrated in Rear and (2) Tall Vertical Integrated in Front (36 inches wide) Extruded aluminum deck Integrated aluminum headache rack Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted) Sealed wiring harness 7 pin plug LED lights Aluminum rubrail with stake pockets Tapered corners for max turning radius Powdercoat steel chassis. (Not available for 7&apos; short bed models) TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.F

New CM RD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-03976034SD. Weighs approx 1100 lbs. Serial # MB00400930. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 8.5' long x 84 inch wide, 56 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-02845638. Weighs approx 910 lbs. Serial # MB00393726. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8&apos; long)- 38 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-03976034SD. Weighs approx 1100 lbs. Serial # MB00402361. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 8.5' long x 84 inch wide, 56 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-02845638. Weighs approx 910 lbs. Serial # MB00392082. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8&apos; long)- 38 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), SD, TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-03976034SD. Weighs approx 1100 lbs. Serial # MB00400920. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM RD Flatbed body only, 8.5' long x 84 inch wide, 56 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), TC, 2.5" 24k rear hitch, color: Black. Mfg part # RD-02845638. Weighs approx 910 lbs. Serial # MB00391233. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- LONG bed (8&apos; long)- 38 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM RD MODEL:- All steel frame construction- Tread plate deck & sides- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.