Truck Bodies For Sale Near council bluffs, Missouri

<p>NEW 11FT LIGHT WEIGHT REFRIGERATED BODY.  4 TO CHOOSE FROM!</p><p>3" POLYSTYRENE INSULATION THROUGHOUT, TWO PANEL REAR SWING DOORS, EXTRUDED ALUMINUM “HAT FLOOR”, SMOOTH SURFACE WITH 2 DRAIN KAZOOS 1 IN EACH CORNER, 12" EXTRUDED ALUMINUM SCUFF, ONE WAY FULL WIDTH STEP BUMPER, ONE PIECE FIBERGLASS ROOF, 1 REAR LED DOMELIGHT WITH REAR SWITCH, G-BOND COMPOSITE EXTERIOR PANELS, LED EXTERIOR FMVSS 108 LIGHTING PACKAGE, EXTERIOR DIMINSIONS 74 ½" HEIGHT, 83" WIDTH, INTERIOR DIMINSIONS 71" HEIGHT, 80" WIDTH, 10.33' LONG.</p>

<p><strong>IN STOCK</strong>, 11FT TO 14FT GEN2 SWITCH-N-GO ELECTRIC SYSYTEM -</p><p>11FT - 14,795.00 -<strong> IN STOCK</strong></p><p>12FT - 15,895.00 - <strong>IN STOCK</strong></p><p>14FT - 16,450.00 - <strong>IN STOCK</strong></p><p><strong>** INSTALL AVAILABLE WITH LED LIGHTING, ICC BAR, HITCHES, STROBE LIGHTING, FENDERS, UNDERBODY BOXES, ETC…</strong></p><p><strong>** PICKUP OR SHIP SYSTEM TO YOUR LOCATION FOR INSTALL</strong></p><p> <strong>Hoist System Specifications</strong> • Model - 18" hoist overhang • Powder coated carbon steel construction • Available in 15,000 (lbs.) winches • Electric over Hydraulic - hydraulic scissor hoist & electric industrial winch</p><p><strong>Requirements/Recommendations</strong> • Requires installation of heavy duty alternator (minimum 150 AMP) • Requires installation of minimum two deep cycle batteries (minimum 750 CCA) • Requires installation of 600 AMP ANL Fuse (included) • Requires electric installation kit components (included) • The 18" body overhang retains a greater dumping capacity with a variety of system capacities • Recommended for up to 6 fully loaded lifts per day</p>

<p><strong>IN STOCK</strong>, 11FT TO 12FT GEN2 SWITCH-N-GO HYDRAULIC SYSYTEM -</p><p>12FT - 18,395.00 - IN STOCK</p><p>14FT - 20,144.00 - IN STOCK</p><p><strong>**WE CAN INSTALL ON YOUR TRUCK OR ONE OF OURS</strong></p><p><strong>** PICKUP OR SHIP SYSTEM TO YOUR LOCATION FOR INSTALL</strong></p><p><strong>Hoist System Specifications</strong> • Now includes 15-gallon steel hydro tank with filter • Model - 18" hoist overhang • Powder coated carbon steel construction • Available in 15,000 or 18,000 (lbs.) winches • Full hydraulic - hydraulic scissor hoist & industrial winch • Includes a high-pressure in-line filter.</p><p><strong>Requirements/Recommendations</strong> • The 18” body overhang retains a greater dumping capacity with a variety of system capacities • Requires minimum hose size (1/2” diameter pressure line, 3/4” diameter return line) • Recommended for unlimited lifts per day • Requires a hydraulic pump providing 3000 psi @ 12-15 GPM • Requires hydraulic installation kit components (included) • Requires either an under-hood clutch pump* or "live drive" style PTO, allowing operation in any gear</p>

<p><strong>IN STOCK</strong>, 11FT SWITCH-N-GO DUMPSTER/DROP BOX, (15) YDS, SINGLE REAR DOOR, 53" SIDES, OVER 100+ BODIES<strong> IN STOCK AT ALL TIMES</strong>, WINDER, GA…</p><p>11FT - 4,595.00 -<strong> IN STOCK</strong></p><p>12FT - 4,795.00 - <strong>IN STOCK</strong></p><p>14FT - 5,295.00 - <strong>IN STOCK</strong></p><p>— Structural steel construction with powder coated finish or wet paint coating finish — Body widths are 88" inside and 96" outside — Interior side heights are 51" — Floors are constructed of 12GA steel sheet with 3" cross channel on 16" centers — Sides are constructed of 12GA steel with 2-3 posts per side and receive structural gussets between rear posts — Top rails are constructed of 3" x 3" x 1/8" square steel tubing or formed top rail — Rear corner posts are constructed of 7GA steel sheet — Tailgates are constructed of a formed 12GA steel sheet with 2" x 2" x 1/8" tubular frame work — Standard 6" steel ground rollers</p>

<p><strong>IN STOCK,</strong> 11FT SWITCH-N-GO DIAMOND-PLATED FLATBED, STAKE POCKETS, RUB RAIL AOUND ENTIRE BODY, (4) TIE DOWN HOOKS, OVER 100+ BODIES <strong>IN</strong> <strong>STOCK AT ALL TIMES</strong>, WINDER, GA…</p><p>11FT - 5,670.00 - <strong>IN STOCK</strong></p><p>14FT - 6,494.00 -<strong> IN STOCK</strong></p><p>15FT - 7,202.00 - <strong>IN STOCK</strong></p><p>— Structural steel construction with zinc prime & powder coated finish — Body widths are 90" for the deck and 94.5" outside — Inside bulkhead heights are high visibility in 39" or 51" — Body lengths include 1' beavertail, bodies without beavertail will receive stake pockets on rear — Floors on 9' to 12' are constructed with 1/8" steel diamond plate — Floors on 13' to 15' are constructed with 3/16" steel diamond plate — Crossmembers are constructed with 3" structural channel on 16" centers — External stake pockets are constructed on 24" centers with 3/8" x 2" flat bar rub rail — Chain tie-down key holes in floor at the four corners — Beavertail bodies receive integrated steel 4" steel ground rollers or no beavertail bodies receive standard 6" steel ground rollers</p><p> </p>

<p><strong>IN STOCK</strong>, 12FT SWITCH-N-GO DUMPSTER/DROP BOX, (16) YDS, SINGLE REAR DOOR, 53" SIDES, OVER 100+ BODIES <strong>IN STOCK AT ALL TIMES</strong>, WINDER, GA…</p><p>11FT - 4,595.00 -<strong> IN STOCK</strong></p><p>12FT - 4,795.00 - <strong>IN STOCK</strong></p><p>14FT - 5,295.00 - <strong>IN STOCK</strong></p><p>— Structural steel construction with powder coated finish or wet paint coating finish — Body widths are 88" inside and 96" outside — Interior side heights are 51" — Floors are constructed of 12GA steel sheet with 3" cross channel on 16" centers — Sides are constructed of 12GA steel with 2-3 posts per side and receive structural gussets between rear posts — Top rails are constructed of 3" x 3" x 1/8" square steel tubing or formed top rail — Rear corner posts are constructed of 7GA steel sheet — Tailgates are constructed of a formed 12GA steel sheet with 2" x 2" x 1/8" tubular frame work — Standard 6" steel ground rollers</p>

2024 EZ-Dumper Long Bed Insert, Flat Bed Body Trailers, , 2022 EZ Dump Short Bed Insert \n-6000lb Lift Capacity \n\n-12 Gauge Floor \n-14 Gauge Sides \n-Expansion Stake Pockets (outside) \n-Flat Bar Rub Rails \n-Powder Coat Black \n-Single Mounted Hoist and Pump \n-Double-Acting Removable Tailgate \n-12V Double Acting Pump & Cylinder \n-Power Up and Power Down \n-Remote Control \n-Thread in Grease Fitting on Pivots \n\n\nPhotos shown with optional Cab Protector and Mesh Tarp kit\n\n-Cab Protector $350 additional\n\n-Tarp Kit $275 additional \nAdditional 3% charge on all card transactions\*Steel, 8 x x

New CM ALSK Flatbed body only, 8.5' long x 97 inch wide, 56 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALSK-02975642. Weighs approx 741 lbs. Serial # MV00411344. Will this bed fit my truck?  This is the standard recommendation for a:Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually (bed delete)Headache Rack height: 45.5 inchNote: Bed will be wider than needed but will work. Meaure to compare. **When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Note for skirted beds: This bed could also possibly work for other trucks with some adaptation but keep in mind if the CA don&apos;t match, then the bed may be touching the truck cab or will have a bigger than normal gap; and the rear wheel won&apos;t be centered in the bed&apos;s wheel well.A 57 inch CA bed is ideal for the 2020 & newer Fords.  CAUTION! If you have a Ford that is 2023 & newer model year and is a bed delete, then please make sure you read the service bulletin from Ford in the pictures! (or give us a call and we can explain it to you).Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALSK MODEL:Aluminum full length skirt w rolled fenders & ATP trimSteel frame constructionQty 4* Aluminum Toolboxes (recessed, lockable, T-handle latches, 2 on each side *Some 7' beds only have a total of 2 boxes)Extruded aluminum deckIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard i

New CM SK Flatbed body only, 7' long x 84 inch wide, 40 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Black. Mfg part # SK-01844038. Weighs approx 937 lbs. Serial # KC00411340. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 1998-2016Axle Type: Single Wheel Short BedHeadache Rack height: 45.5 inch--- OR ---Make: Ram (Dodge)Years: 2002-EarlierAxle Type: Single Wheel Short BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM SK MODEL:- All steel frame construction- Full length skirt w rolled fenders & ATP trim- Qty 4* Toolboxes (recessed, lockable, T-handle latches, 2 on each side)   --*Some 7' beds only have a total of 2 boxes- Tread plate deck- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

2024 CM® Truck Beds, AL PL Aluminum Platform 9' Truck, Truck Bed, 2023 CM® Truck Beds AL PL Aluminum Platform 9' <strong>Built to work. Built to last.</strong><p>Take uncertainty out of the equation with CM s AL PL model: Strong and durable yet lightweight and efficient, this aluminum platform body is reliable through-and-through.</p><p><strong>Features may include:</strong></p><strong>Welded bulkhead (41 off deck) with plasma cut easy view window grill</strong><ul><li>Stronger, more durable and integrated into the bed.</li></ul><strong>Heavy-duty welded bulkhead</strong><ul><li>Provides extra strength and security. It has less flexibility in the deck, making your hauls more secure.</li></ul><strong>4' structural steel channel frame rails</strong><ul><li>Because we don t use roll-formed runners, our structural 4' channel frame rails are stronger and more durable than any on the market. They also prevent any rusting from the interior of the tube.</li></ul><strong>3 x 3/8 Rub rail with stake pockets</strong><ul><li>These accommodate your straps and give you multiple tie-down points for your hauling jobs.</li></ul><strong>Extruded aluminum floor</strong><ul><li>CM Truck Beds uses an extruded aluminum decking system, which is stronger than treadplate and withstands the harshest weather conditions, preventing the type of corrosion experienced on many steel bodies.</li></ul><strong>1/8 steel formed sides and rear</strong><ul><li>CM provides stronger, more durable, and thicker formed sides and rear than the competition.</li></ul><strong>Modular sealed wiring harness</strong><ul><li>Our modular sealed wiring harnesses are resistant to corrosion, deterioration and pulling apart, meaning they can withstand the harshest conditions.</li></ul><strong>3 steel roll-formed 3/16 channel crossmembers on 12 centers</strong><ul><li>These are the toughest and most durable work truck subframes.</li></ul><strong>LED recessed rubber mounted clearance lights</strong><ul><li>CM s lights are brighter and use less power than conventional incandescent lights, so your rubber mounted clearance lights will be easily seen and recognized.</li></ul><strong>LED DOT required lighting (clearance and marker lights)</strong><ul><li>When you are backing up, turning, or hitting your brakes along the road, our LED lights will make your truck bed stand out more.</li></ul>

<p><strong>IN STOCK</strong>, 11FT TO 15FT SWITCH-N-GO HEAVY-DUTY DUMPSTER / DROP BOX, (15YDS TO 22YDS) YDS, SINGLE REAR DOOR AND DOUBLE REAR DOORS, 51" SIDES, <strong>BODIES IN STOCK AT ALL TIMES</strong>…. WINDER, GA…</p><p><i><strong>MEDIUM DUTY</strong></i></p><p>11FT - 6,694.00 - <strong>IN STOCK</strong></p><p>12FT - 6,934.00<strong> - IN STOCK</strong></p><p>14FT - 7,721.00 - <strong>IN STOCK</strong></p><p>15FT - 8,233.00 - <strong>IN STOCK</strong></p><p>— Structural steel construction with zinc prime & powder coated finish — Body widths are 88" inside and 96" outside — Interior side heights are 39" or 51" — Floors are constructed of 3/16" steel sheet with 3" structural channel on 12" centers — Top rails are constructed of 3" x 3" x 1/8" square steel tubing — Sides are constructed of 12GA steel sheet with posts on 30-36" centers and receive structural gussets between rear posts — Rear corner posts are constructed of 7GA steel sheet Tailgates are constructed of a 3" x 3" x 1/8" top tube — Standard 6" steel ground rollers</p>

<p><strong>11FT AND 14FT SWITCH-N-GO DUMP BODIES / DROP BOX, IN STOCK……</strong></p><p>Tailgates are constructed of 10GA steel with standard height of 28" and 2-way for drive on ramp and built to accept tailgate spreaders…. WINDER, GA…</p><p>11FT - 7,557.00 - <strong>IN STOCK (SOLID SIDES)</strong></p><p>11FT - 8,283.00 - <strong>IN STOCK (DROP SIDES)</strong></p><p>14FT - 8,024.00 - <strong>IN STOCK (SOLID SIDES)</strong></p><p>14FT - 8,722.00<strong> - IN STOCK (DROP SIDES)</strong></p><p>Structural steel construction with zinc prime & powder coated finish Floors are constructed of 10GA steel with 3" crossmembers on 16" centers Body widths are 88" inside and 9S.S" outside Bulkheads are constructed of 12GA steel with a standard (39"), medium (44") or high bulkhead (51")</p><p>Sides are constructed of 12GA steel with a standard height of 12" and 12" high board pockets Tailgates are constructed of 10GA steel with standard height of 28" and 2-way for drive on ramp and built to accept tailgate spreaders Top Rails are constructed of 3" x 3" x 1/8" square steel tubing Standard 6" steel dump body ground rollers</p>

2024 CM® Truck Beds, RD Steel 9'4" fits 60"CA extra tall headache rack Truck, Truck Bed, 2023 CM® Truck Beds RD Steel Flat Deck 9'4" <strong>Built to work. Built to Last.</strong><p>Tough enough to haul the big loads, the popular RD models are expertly designed, professional-grade workhorses that are sized to fit almost any unit.</p><p><strong>Features may include:</strong></p><strong>Integrated tube headache rack</strong><ul><li>Our headache racks are designed with the best and strongest materials to keep you safe when the unexpected happens.</li></ul><strong>Super-durable powder-coat finish</strong><ul><li>CM Truck Beds coats our products with powder, rather than paint. We cover every crevice and corner, providing long-lasting protection and a superior finish and shine!</li></ul><strong>4 structural steel channel frame rails</strong><ul><li>Because we don t use roll-formed runners, our structural 4" channel frame rails are stronger and more durable than any on the market. They also prevent any rusting from the interior of the tube.</li></ul><strong>1/4 rub rails and stake pockets</strong><ul><li>These accommodate your straps and give you multiple tie-down points throughout your hauling jobs.</li></ul><strong>1/8" steel treadplate deck</strong><ul><li>This strong and long-lasting deck is designed for heavy-duty work, withstanding the rigorous work conditions that our bodies are placed under. Compare to other bodies on the market, which use 11-gauge and 13-gauge floors.</li></ul><strong>30,000 lb.-rated B&W gooseneck hitch with 7-way electrical plug</strong><ul><li>This is a best-in-class, independently tested gooseneck hitch that handles even your toughest hauls. It also contains a 7-way electrical plug to give you ample choices for your power-driven needs.</li></ul><strong>Modular sealed wiring harness</strong><ul><li>Our modular sealed wiring harnesses are resistant to corrosion, deterioration and pulling apart, meaning they can withstand the harshest conditions.</li></ul><strong>18,500 lb.-rated B&W bumper pull hitch</strong><ul><li>CM s independently rated bumper pull hitch gives you best-in-class towing capacity, which is integrated into the entire frame.</li></ul><strong>7-way round and 5-way flat electrical plug standard on rear tailboard</strong><ul><li>This standard feature provides quality results and allows you to hook on to any trailer.</li></ul><strong>LED DOT required lighting (clearance and marker lights)</strong><ul><li>When you are backing up, turning, or hitting your brakes along the road, our LED lights will make your truck bed stand out more.</li></ul><strong>3 Steel roll-formed 3/16 channel cross members</strong><ul><li>These are the toughest and most durable work truck subframes.</li></ul><strong>Angled fuel fill</strong><ul><li>Provides a shinier, and better-looking feature to your work truck, as well as a no-corrosion zone for all your in-and-out hauls.</li></ul><strong>2 LED recessed tail, brake

<p><i>Stellar TMAX16K - 11' Aluminum Mechanic Body. Aluminum</i></p><p><i>Side Packs, Aluminum Doors. All compartments raised to 52"</i></p><p><i>with 8" Drop Well in CS1V for full size OXY Bottles, Flush</i></p><p><i>front bulkhead, exterior DOT light package, Master-Lock</i></p><p><i>system, 22"D X 52"H side packs, 133" long, 50" loadbed</i></p><p><i>width, (6) recessed cargo tie-downs, (2) rear mounted grab</i></p><p><i>handles, dual-seal automotive type compartment weather</i></p><p><i>seal, overlapped doors on SS1V / CS1V, overlapped doors on</i></p><p><i>horizontal compartments, 12" fold down aluminum tailgate</i></p><p><i>(painted black), 2 & 3-point stainless steel compression</i></p><p><i>latches, stainless steel "Billet Style" hinges, spring</i></p><p><i>loaded door stops, weld on receiver hitch, prime painted,</i></p><p><i>undercoated.</i></p><p><i>Bolt on 21” work bench bumper with thru-compartment for TMAX16K aluminum mechanic body</i></p><p><i>Drawers, shelving and interior and exterior LED lights through out body</i></p><p> </p><p>ELECTRIC/HYDRAULIC CRANES AVAILABLE IF DESIRED.</p><p>PRICE INCLUDES TRUCK UP FIT. TRUCK EQUIPMENT CAN ALSO FIND YOU A CHASSIS IF DESIRED. </p><p>Please call or email with any questions </p><p>Thank you!</p><p> </p>

2024 Norstar, SR 84" x 84" Truck, Truck Bed, 2024 Norstar SR 84" x 84" <strong>Norstar Diamond Plate Flat Bed</strong><p>One of our best sellers - and for good reason. The Norstar SR model offers everything you need in a flatbed configuration. If you want a little more from this basic configuration, look over our options list. We have underbody locking tool boxes for additional storage and gooseneck troughs for a towing upgrade, spare tire mounts for the unexpected and a list of other options to personalize your bed for your home or business needs.</p><p>The standard 2.5" receiver allows you to add a hitch for bumper pull cargo and a 2 5/16" gooseneck ball is standard in case you are hauling a heavyweight. Our receivers are lab tested and certified for 18,500 lbs bumper capacity and 30,000 lbs gooseneck capacity. Durable diamond plate construction and powder coat will make this bed your most faithful assistant for years to come. Tapered corners, 7 way plug with 4 way adapter and recessed 2 5/16" ball and receiver hitch give you a towing package standard. Exposed stake pockets and rub rail ensure you have tie down points for any load, plus the LED lights are standard on all SRs. Full 11 gauge skirted rear bumpers finish off every model as an additional standard feature.</p><strong>Features may include:</strong><ul><li>Structural Steel Frame</li></ul><ul><li>2.5" 18.5k Rated Bumper Receiver</li></ul><ul><li>30k Rated 2 5/16" Gooseneck Ball</li></ul><ul><li>4" Runner Channels</li></ul><ul><li>Formed 3 x 3/16" Channel Cross Members</li></ul><ul><li>Steel Tube Head Rack with Cross Bars, Tail and Reverse Lights</li></ul><ul><li>Steel 1/8" Diamond Plate Floor</li></ul><ul><li>Built-In Gooseneck Well w/ Ball Mounted and Diamond Plate Lid</li></ul><ul><li>Angled Fuel Filler Neck and DEF Ready</li></ul><ul><li>1/8" Diamond Plate Construction</li></ul><ul><li>Receiver Hitch Ready</li></ul><ul><li>7 Way Plug in Gooseneck Box</li></ul><ul><li>Powder Coated Black</li></ul><ul><li>2.5" LED Reflective Marker Lights</li></ul><ul><li>4 Clear 6" Oval LED Reverse Lights</li></ul><ul><li>6 Red 6" Oval LED ST/TL/TN Lights</li></ul><ul><li>Single LED License Plate Light</li></ul><ul><li>All Lighting DOT Approved</li></ul><ul><li>Molded Sealed Harness with Resistors</li></ul><ul><li>7 Way Receiver Female Plug with ADAPTER</li></ul><ul><li>11 Ga Skirted Rear Bumper</li></ul><ul><li>Adjustable Mud Flap Brackets</li></ul>, Connecticut Trailers features the following options for this Norstar Truck Bed: Adj. Runners 4"x38"-42" 24" OC Diamond Plate w/2.5" Reciever Side Pockets and Rub Rails 3.5" Tube x 37.75" Head Rack 2-5/16" 30K Ball 4/5/7 Way Plug + 7 Way in GN Well LED Lights