Used ALTEC OTHER For Sale Near franklinville, New Jersey

2021 ALTEC, MT66-E76, Cranes - Boom Truck Cranes - Mounted, , Automatic, -2021 Freightliner M2 106 Single Cab Heavy Duty Grapple Saw Tree Limb Trimming Truck -12K Miles / 326 Engine Hours / 56 PTO Hours -Cummins 6.7L Turbo Diesel Engine -6 Speed Allison Automatic Transmission -Altec MT66-E76 Articulating Over Center 76' Cutting Head -Wireless Proportional Remote -(4) fully hydraulic outriggers -Single Axle -Air Brakes -33,000 GVWR -Please view all 145 pictures and attached video! -Ready to go to work! A very nice (close to new) 12K mile, 326 total engine hour (56 PTO hours) tree trimming grapple truck in excellent condition overall and ready to work. No stories with this truck - we bought it exactly how you see it. This truck is in like new condition and runs, drives, and operates just as it should! The Cummins 6.7L turbo diesel starts right up and sounds great with no issues. The Allison automatic transmission shifts good and goes through all gears nicely. The Altec MT66-E76 articulating grapple saw has a 76' reach from head to ground. The grapple and saw appear to be in like new condition and both function as they should. The PTO to control the boom is activated by an in cab PTO switch. It operates nicely with no hiccups or issues. The (4) hydraulic outriggers function as they should. The bed is in like new condition with no major rust or areas of concern. The bed shows little to no use or wear. We did no paint work or touching up on this truck. The interior shows well and is clean with no excessive wear. The frame and underside is in the original condition and shows like new. No warning lights are illuminated on the dash. All tires are in good condition with great tread left. The truck runs and drives nicely down the road with no areas of concern. This truck is ready to go right back into service. The boom appears to have been used only a few times and the truck can be compared to a new one. Please view all pictures and attached video for an accurate representation of the truck. We are located in Clarksville, Maryland 21029. For any further questions or a shipping quote feel free to contact us. Thank you for looking., Horse Power, Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN 1020HG0122

2011 ALTEC, A72T, Cranes - Bucket Trucks / Service Trucks, , Automatic, *PRELIMINARY LISTING* *MORE PICTURES AND VIDEO COMING SOON ONCE DETAIL AND BOOM INSPECTION IS COMPLETED* -2011 Prinoth GT3000 Altec Bucket Track Machine -Caterpillar C7 275HP Turbo Diesel -2286 Hours Showing -Altec A72-T 77' Working Height / 72' Platform Height (800lb capacity 2 man bucket) -Material Handler (2000lb capacity) -Hydraulic Front Mounted Winch -Fleet Maintained & Owned (Power Company) -60,000 GVWR -Clean inside & out! -Very presentable & ready to work! -Please view all pictures and attached video of the machine! -Shipping available to all of USA! Contact us for a quote! -Maryland 6% sales tax charged in addition to price regardless of in or out of state This is a well maintained machine and ready to go to work. The Caterpillar C7 275HP turbo diesel engine starts right up and has great power for this machine, moves it along well. The operation is smooth and effortless via steering wheel and F/N/R switch. The machine is showing 2286 hours and overall is in nice working condition. The Altec A72-T 77' bucket unit operates 100% and has a 2000lb capacity material handler that functions correctly. Everything operates correctly with no known issues or leaks. The outriggers function great via rear ground control station. Both upper and lower controls for the bucket function as they should. The tracks appear to be in good condition with light wear showing on par with the hours. This machine was purchased out of a large fleet and appears to have been maintained and serviced well. Very useful machine for off-road line work and is ready to go to work. Please take a look at all pictures and attached operational video for an accurate representation of this machine. We are located in Clarksville, Maryland 21029. For any further, Horse Power, Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN

2011 ALTEC, D3060ATR, Cranes - Digger Derricks - Truck-Mounted, , , You re viewing a 2011 Kenworth T370 4X4 Digger Derrick #295520. This truck is powered by a 300 HP PX8/Cummins diesel engine with an automatic transmission with only 59,410 miles. The digger is a Altec D3060 with a 24-inch auger. Inside the cab you have a driver side air ride, split bench seat, power passenger window, power locks, diff lock, AC, and a AM/FM radio. Body is a 18ft flatbed, and has a 40 ton pintle hitch with air and electric in the rear. This truck sits on a spring suspension with 315 22.5 front tires and 11 22.5 rear tires, on steel and aluminum rims. This vehicle qualifies as a Cassone Truck Sales Pre-Owned vehicle which includes a 30-Day limited Warranty. At Cassone we also offer financing options and nationwide shipping. LENGTH 365 WIDTH 96 HEIGHT 156 GVW 56,000 GVW REAR 40,000 GVW FRONT 16,000, Horse Power, Spring Suspension, Wheels, 213 Wheel Base, , Axle, Ratio, , VIN

2010 ALTEC, AM900-E100, Cranes - Bucket Trucks / Service Trucks, , Automatic, You re viewing a 2010 Freightliner M2 112 6x6 105 Foot Double Elevator Bucket Truck #AU4438. This truck is powered by a 12.8 MBE 4000 435HP diesel engine and an Allison 4500 automatic transmission with ONLY 19,195 miles. This truck has a 24ft Altec body with 7 job boxes with organizers, spotlights, and strobes lights. Inside the cab you have two air ride bucket seats, cruise control, diff lock, engine brake, engine heater, heated mirrors, A/C, air brakes, trailer air and brake in dash, and a AM/FM radio. This double elevator Altec boom (Model AM900-E100) is insulated with a 600lbs capacity bucket with a 105ft working height boom. This truck has upper controls, bucket controls, hydraulics at the bucket, and front and rear outriggers. Boom inspected. This truck sits on a spring suspension, steel rims, and 425 / 65 R 22.5 front tires, and 11R 22.5 rear tires. This vehicle qualifies as a Cassone Truck Sales Pre-Owned vehicle which includes a 30-Day limited Warranty. At Cassone we also offer financing options and nationwide shipping. VIN - 1FVHC5CV6ADAU4438 LENGTH 38 FT WIDTH 96\' HEIGHT 13' 5\' WHEELBASE 270 CAB TO AXLE 178 CAB TO END 27FT GVW Total - 60,000 GVW Rear - 40,000 GVW Front - 20,000, Horse Power, Spring Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN