Truck Bodies For Sale Near maple shade, Wyoming

<p><strong>IN STOCK</strong>, 11FT AND 14FT SWITCH-N-GO DUMP BODIES / DROP BOX, Tailgates are constructed of 10GA steel with standard height of 28" and 2-way for drive on ramp and built to accept tailgate spreaders…. WINDER, GA…</p><p>14FT - 8,024.00 - IN STOCK</p><p>Structural steel construction with zinc prime & powder coated finish Floors are constructed of 10GA steel with 3" crossmembers on 16" centers Body widths are 88" inside and 9S.S" outside Bulkheads are constructed of 12GA steel with a standard (39"), medium (44") or high bulkhead (51")</p><p>Sides are constructed of 12GA steel with a standard height of 12" and 12" high board pockets Tailgates are constructed of 10GA steel with standard height of 28" and 2-way for drive on ramp and built to accept tailgate spreaders Top Rails are constructed of 3" x 3" x 1/8" square steel tubing Standard 6" steel dump body ground rollers</p>

2024 Aluma 96144, Flat Bed Body Trailers, , We do not offer installation or shipping This bed is for a full size truck with dual rear wheels Extruded aluminum floor with drop rear skirt Headache rack with lights 3" Channel main stringers, adjustable to fit different truck models LED Light package (2 taillights, 7 clearance lights) License plate light Pre-wired with lights installed Back-up lights 1/4" x 2" Rub rail with stake pockets These are cash prices 3% charge on credit card transactionsAluminum, 12 x 8.00 x

1999 GMC 3500 crew cab Contractor's body with 12’ flatbed. Miles: 74,184 V8 7.4l Gas engine Dual Fuel Tanks The truck is in great running shape. All new tires, new fuel pumps, new alternator, New trailer brake controller. Power windows and Power Locks. Working AC Locking toolboxes. Must sell ASAP!

2024 EZ-Dumper Short Bed Insert, Flat Bed Body Trailers, , This is for a full size truck with a short bed (65 Ft) 6000# lift capacity 12 gauge steel floor 14 gauge steel sides Stake pockets with rub rail Removable double acting tailgate 2 year full parts and labor warranty Price does not include options shown in photos Cab protector $40000 Tarp kit $32500 These are all cash prices 3% charge on all credit card transactionsSteel, 0 x x

<p>Leased, and Bought from Ryder new. Maintained and Serviced by Ryder since new.</p><p><br></p><p>This truck was used for light duty deliveries and would never reach its weight capacity. Was used for Volume over Weight. Only ran 3 or 4 days a week for day routes. </p><p><br></p><p>26ft long trailer. Will fit 12 skids.</p><p><br></p><p>Gross Vehicle Weight Rating: Class 6: 19,501 - 26,000 lb (8,845 - 11,794 kg)</p><p>Cylinders: 6Drive Type: 4x2</p><p>Primary Fuel Type: DieselEngine</p><p>Model: Cummins B6.7</p><p>Secondary Fuel Type:Engine Brake (HP):</p><p>Engine Manufacturer: Cummins</p><p>Cab Type: MDHD: Conventional Bed Type:</p><p>Engine Displacement (L): 6.7</p>

2021 Norstar, SD Service Body, Truck Body, 2021 Norstar SD <p>The Norstar SD Service bed is perfect for the tradesman. Our Service Bed offers multiple standard tool boxes and many options for your on the go needs. This bed comes with 2 vertical cabinets, 2 angled boxes, 2 top boxes, and 2 rear underbody boxes plus a bonus locking rear shovel compartment for tons of storage. Multiple option choices allow you to build this bed to your industry. All doors are gas shock equipped and locking paddle latches are standard as well as a serviceable, tamper-resistant integrated door hinge system new for 2021. Our 2.5 receiver allows you to add a hitch for bumper pull cargo and a 2 5/16 gooseneck ball is standard in case you are hauling a heavyweight. Our receivers are lab tested and certified for 18,500 lbs bumper capacity and 30,000 lbs gooseneck capacity. Standard adjustable galvanized tool trays with available cabinet tool drawers can add the finishing touch if you have a lot of parts or tools for your work load. Dual LED rear work lights and cast aluminum light housings as well as tail gate are standard features on the SD. These beds are a perfect complement for any single or dual wheel work truck with smooth 12 gauge sides, 11 gauge bumper and gloss black powder coating.</p><strong>Features may include:</strong><ul><li>Steel Structural Frame</li></ul><ul><li>2" 18.5k Rated Bumper Receiver</li></ul><ul><li>30k Rated 2 5/16" Gooseneck Ball</li></ul><ul><li>4 Runner Channels (Adjustable on 56 CTA Only)</li></ul><ul><li>Formed 3 x 3/16 Channel Cross Members</li></ul><ul><li>Steel Tube Head Rack w/ Cross Bars, Tail & Rev. Lights</li></ul><ul><li>Steel 1/8 Diamond Plate Floor</li></ul><ul><li>Tail Gate Fold-Down with Latch</li></ul><ul><li>Built in Gooseneck Well w/ Ball Mounted & Diam Plate Lid</li></ul><ul><li>Angled Fuel Filler Neck & DEF Ready</li></ul><ul><li>Skirted Rear Bumper w/ Anti Slip Step</li></ul><ul><li>Receiver Hitch Ready</li></ul><ul><li>4 Tool Boxes w/ locking chrome paddle latch on Each Side (5 on 11 4 )</li></ul><ul><li>Rear Lockable Compartment 27 x 38 - 78 </li></ul><ul><li>12 Ga Steel Construction</li></ul><ul><li>Mudflap Brackets</li></ul><ul><li>7 Way Plug in Gooseneck Box</li></ul><ul><li>LED Head Rack Work Light</li></ul><ul><li>Adjustable Smooth Flare Fenders</li></ul><ul><li>Powder Coated Black</li></ul><ul><li>3/4 LED Marker Lights</li></ul><ul><li>4 Clear 6 Oval LED Reverse Lights</li></ul><ul><li>6 Red 6 Oval LED ST/TL/TN Lights</li></ul><ul><li>Single LED License Plate Light</li></ul><ul><li>Side & Rear Reflectors</li></ul><ul><li>LED Rear Work Light w/ Switch on Headrack</li></ul><ul><li>All Lighting DOT Approved</li></ul><ul><li>Molded Sealed Harness w/ Resistors</li></ul><ul><li>4/5 & 7 Way Receiver Female Plug w/ ADAPTER</li></ul><ul><li>Adjustable Galvanized Shelves in Front Tool Boxes</li></ul>, SD Service Deck 8'6" x 84" - 58" CTA

2024 CM® Truck Beds, AL PL Aluminum Platform 9' Truck, Truck Bed, 2023 CM® Truck Beds AL PL Aluminum Platform 9' <strong>Built to work. Built to last.</strong><p>Take uncertainty out of the equation with CM s AL PL model: Strong and durable yet lightweight and efficient, this aluminum platform body is reliable through-and-through.</p><p><strong>Features may include:</strong></p><strong>Welded bulkhead (41 off deck) with plasma cut easy view window grill</strong><ul><li>Stronger, more durable and integrated into the bed.</li></ul><strong>Heavy-duty welded bulkhead</strong><ul><li>Provides extra strength and security. It has less flexibility in the deck, making your hauls more secure.</li></ul><strong>4' structural steel channel frame rails</strong><ul><li>Because we don t use roll-formed runners, our structural 4' channel frame rails are stronger and more durable than any on the market. They also prevent any rusting from the interior of the tube.</li></ul><strong>3 x 3/8 Rub rail with stake pockets</strong><ul><li>These accommodate your straps and give you multiple tie-down points for your hauling jobs.</li></ul><strong>Extruded aluminum floor</strong><ul><li>CM Truck Beds uses an extruded aluminum decking system, which is stronger than treadplate and withstands the harshest weather conditions, preventing the type of corrosion experienced on many steel bodies.</li></ul><strong>1/8 steel formed sides and rear</strong><ul><li>CM provides stronger, more durable, and thicker formed sides and rear than the competition.</li></ul><strong>Modular sealed wiring harness</strong><ul><li>Our modular sealed wiring harnesses are resistant to corrosion, deterioration and pulling apart, meaning they can withstand the harshest conditions.</li></ul><strong>3 steel roll-formed 3/16 channel crossmembers on 12 centers</strong><ul><li>These are the toughest and most durable work truck subframes.</li></ul><strong>LED recessed rubber mounted clearance lights</strong><ul><li>CM s lights are brighter and use less power than conventional incandescent lights, so your rubber mounted clearance lights will be easily seen and recognized.</li></ul><strong>LED DOT required lighting (clearance and marker lights)</strong><ul><li>When you are backing up, turning, or hitting your brakes along the road, our LED lights will make your truck bed stand out more.</li></ul>

2021 Cadet Truck Bodies GRASSMASTER-96-144-34 RAMP GATE, Flat Bed Body Trailer, , CADET GRASSMASTER MODEL STEEL PLATFORM LANDSCAPING BED FOR TRUCK, 96" WIDE, 12&apos; LONG PLUS THE DOVETAIL, 34" FRAME WIDTH, THIS BED FITS A DUALLY WHEEL CAB AND CHASSIS TRUCK (12&apos; FRAME), 1/8" TREAD PLATE FLOOR, 3" CHANNEL CROSSMEMBERS ON 18" CENTERS, 4" STRUCTURAL CHANNEL LONG SILLS, 60" HEIGHT HEADACHE RACK WITH 24" X 24" EXPANDED METAL LOCKABLE STORAGE COMPARTMENT, 17" EXPANDED METAL HINGED SIDES, 4&apos; DOVETAIL WITH 1/8" TREADPLATE AND EXPANDED METAL OVERLAY, 5&apos; SINGLE PIECE SPRING ASSISTED FOLD DOWN RAMP, 7 RED AND 2 AMBER LED CLEARANCE LIGHTS, BLACK POLYURETHANE PAINT, (2) OVAL LED TAIL LIGHTS AND 2 LED BACKUP TAIL LIGHTS, ALL WEATHER UNDER-COATING, WEATHERPROOF WIRING HARNESS, 12 x 8.00 x

2021 Cadet Truck Bodies GRASSMASTER-96-144-34 RAMP GATE, Flat Bed Body Trailer, , CADET GRASSMASTER MODEL STEEL PLATFORM LANDSCAPING BED FOR TRUCK, 96" WIDE, 12&apos; LONG PLUS THE DOVETAIL, 34" FRAME WIDTH, THIS BED FITS A DUALLY WHEEL CAB AND CHASSIS TRUCK (12&apos; FRAME), 1/8" TREAD PLATE FLOOR, 3" CHANNEL CROSSMEMBERS ON 18" CENTERS, 4" STRUCTURAL CHANNEL LONG SILLS, 60" HEIGHT HEADACHE RACK WITH 24" X 24" EXPANDED METAL LOCKABLE STORAGE COMPARTMENT, 17" EXPANDED METAL HINGED SIDES, 4&apos; DOVETAIL WITH 1/8" TREADPLATE AND EXPANDED METAL OVERLAY, 5&apos; SINGLE PIECE SPRING ASSISTED FOLD DOWN RAMP, 7 RED AND 2 AMBER LED CLEARANCE LIGHTS, BLACK POLYURETHANE PAINT, (2) OVAL LED TAIL LIGHTS AND 2 LED BACKUP TAIL LIGHTS, ALL WEATHER UNDER-COATING, WEATHERPROOF WIRING HARNESS., 12 x 8.00 x

2023 ALCOM AL08485, Truck Bed, Length: 102.00, Width: 0.00, Weight: , GVWR: , Pull Type: , 2023 ALCOM AL08485 Flat Decks, 12" Extruded Rear Apron<br />All Aluminum Construction<br />Extruded Aluminum Decking<br />Integrated Headboard w/ Accessory Track<br />Perimeter Rub Rail w/ Stake Pockets<br />Recessed LED Marker Lights<br />Fully Enclosed Wiring System<br />3" Aluminum I-beam crossmembers (24" on Center)<br />Long Box Single Wheel

2023 ALCOM AL 10185, Truck Bed, Length: 102.00, Width: 0.00, Weight: , GVWR: , Pull Type: , 2023 ALCOM AL 10185 Flat Decks, 12" Extruded Rear Apron<br />All Aluminum Construction<br />Extruded Aluminum Decking<br />Integrated Headboard w/ Accessory Track<br />Perimeter Rub Rail w/ Stake Pockets<br />Recessed LED Marker Lights<br />Fully Enclosed Wiring System<br />3" Aluminum I-beam crossmembers (24" on Center)<br />Long Box Dual Wheel

2023 ALCOM AL 10185, Truck Bed, Length: 102.00, Width: 0.00, Weight: , GVWR: , Pull Type: , 2023 ALCOM AL 10185 Flat Decks, 12" Extruded Rear Apron<br />All Aluminum Construction<br />Extruded Aluminum Decking<br />Integrated Headboard w/ Accessory Track<br />Perimeter Rub Rail w/ Stake Pockets<br />Recessed LED Marker Lights<br />Fully Enclosed Wiring System<br />3" Aluminum I-beam crossmembers (24" on Center)<br />Long Box Dual Wheel

The Switch-N-Go standard duty 12' dump body is structural steel construction with zinc prime and powder-coated finish. Floors are constructed of 10 gauge steel with 3" crossmembers on 16" centers. Body widths are 88" inside and 95.5" outside. The bulkhead is constructed of 12 gauge steel and is 39" high. Sides are constructed of 12 gauge steel with a standard height of 12" and 12" high board pockets. Tailgates are constructed of 10 gauge sheet with a standard height of 28", 2-way for drive-on ramp, and built to accept tailgate spreaders. The top Rails are constructed of 3" X 3" X 1/8" square steel tubing and this body has standard 6" steel dump body ground rollers. This dump body has a 3.3-cubic yard capacity.

The Switch-N-Go standard duty 8' dump body is structural steel construction with zinc prime and powder-coated finish. Floors are constructed of 10 gauge steel with 3" crossmembers on 16" centers. Body widths are 88" inside and 95.5" outside. The bulkhead is constructed of 12 gauge steel and is 39" high. Sides are constructed of 12 gauge steel with a standard height of 12" and 12" high board pockets. This dump body has fold-down sides that are constructed with two spring latches on the front and rear exterior corners. Tailgates are constructed of 10 gauge sheet with a standard height of 24", 2-way for drive-on ramp, and built to accept tailgate spreaders. The top Rails are constructed of 3" X 3" X 1/8" square steel tubing and this body has standard 6" steel dump body ground rollers. This dump body has a 2.2-cubic yard capacity. This dump body was built with a 1' rear apron with clipped corners.

2022 CM Trailers PL-144/101/84/34, Flat Bed Body Trailer, , CM PL MODEL STEEL PLATFORM BED, 12&apos; X 101" WIDE, 34" FRAME WIDTH, 84" CAB TO AXLE, 1/8" STEEL TREADPLATE FLOOR, HEAVY DUTY WELDED BULKHEAD, REAR RUB RAIL WITH STAKE POCKETS, RUB RAIL WITH STAKE POCKETS ALONG BOTH SIDES, LED CLEARANCE LIGHTS, SMOOTH SIDES AND REAR, MODULAR SEALED WIRING HARNESS, BLACK POWDERCOAT Please check with us for exact fitment as makes vary slightlySteel, 12 x 8.50 x