LOAD TRAIL Trucks For Sale Near rockdale, Illinois

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.AS IS Load Trail LT-SD Flatbed body only, 9.3' long x 84 inch wide, 60 inch cab to axle, 34 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - 2FTB, 2RTB, 21k 2.5" rear hitch, 30k GN hitch, AS IS (bed is too narrow for DRW trucks - requires modification like adding fenders), Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # SD840946034SS_48128. Weighs approx 1334 lbs. Serial # 4ZESD0866N3267635. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Single Wheel Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Single Wheel Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Single Wheel Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).Please measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.AS IS Load Trail LT-SD Flatbed body only, 9.3' long x 84 inch wide, 60 inch cab to axle, 34 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - 2FTB, 2RTB, 21k 2.5" rear hitch, 30k GN hitch, AS IS (bed is too narrow for DRW trucks - requires modification like adding fenders), Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # SD840946034SS_48128. Weighs approx 1334 lbs. Serial # 4ZESD0863N3267592. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: All Model YearsAxle Type: Single Wheel Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).--- OR ---Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Single Wheel Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).--- OR ---Make: Ram (Dodge)Years: 2007-PresentAxle Type: Single Wheel Cab & Chassis (60 inch CA)Headache Rack height: 45.5 or 48 inchNote: Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).Please measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.AS IS Load Trail LT-FD Flatbed body only, 9.3' long x 84 inch wide, 60 inch cab to axle, 34 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, AS IS (bed is too narrow for DRW trucks - requires modification like adding fenders), Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # FD840946034SS_47404. Weighs approx 1070 lbs. Serial # 4ZESD0867N3268552. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail width- Headache Rack height: 45.5 or 48 inch- Note: Bed is too narrow for DRW trucks - requires modification like adding fenders. Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).Please measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.AS IS Load Trail LT-FD Flatbed body only, 9.3' long x 84 inch wide, 60 inch cab to axle, 34 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, AS IS (bed is too narrow for DRW trucks - requires modification like adding fenders), Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # FD840946034SS_47404. Weighs approx 1070 lbs. Serial # 4ZESD0860N3265024. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail width- Headache Rack height: 45.5 or 48 inch- Note: Bed is too narrow for DRW trucks - requires modification like adding fenders. Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).Please measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.AS IS Load Trail LT-FD Flatbed body only, 9.3' long x 84 inch wide, 60 inch cab to axle, 34 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, AS IS (bed is too narrow for DRW trucks - requires modification like adding fenders), Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # FD840946034SS_47404. Weighs approx 1070 lbs. Serial # 4ZESD0864N3273837. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - SINGLE Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail width- Headache Rack height: 45.5 or 48 inch- Note: Bed is too narrow for DRW trucks - requires modification like adding fenders. Bed could fit on a standard 8' long bed SRW pick up truck with extra bracing & fabricating (bed will overhang truck frame).Please measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 8.5' long x 97 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, will also work for 56-57 inch CA trucks, color: Black. Mfg part # FD970865242SS. Weighs approx 1081 lbs. Serial # 4ZEFD0863R3313929. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, color: Black. Mfg part # FD970946034SS. Weighs approx 1079 lbs. Serial # 4ZEFD0865R3312281. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 8.5' long x 97 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, will also work for 56-57 inch CA trucks, color: Black. Mfg part # FD970865242SS. Weighs approx 1081 lbs. Serial # 4ZEFD0866R3313925. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, color: Black. Mfg part # FD970946034SS. Weighs approx 1079 lbs. Serial # 4ZEFD0868R3313831. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, color: Black. Mfg part # FD970946034SS. Weighs approx 1079 lbs. Serial # 4ZEFD0863R3312280. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, color: Black. Mfg part # FD970946034SS. Weighs approx 1079 lbs. Serial # 4ZEFD0860R3312284. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 8.5' long x 97 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, will also work for 56-57 inch CA trucks, color: Black. Mfg part # FD970865242SS. Weighs approx 1081 lbs. Serial # 4ZEFD0864R3313924. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 9.3' long x 97 inch wide, 60 inch cab to axle, 34 inch frame rail width, 48 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, color: Black. Mfg part # FD970946034SS. Weighs approx 1079 lbs. Serial # 4ZEFD0869R3312283. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits ALL makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- Chassis (60 inch CA)- 34 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 8.5' long x 97 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, will also work for 56-57 inch CA trucks, color: Black. Mfg part # FD970865242SS. Weighs approx 1081 lbs. Serial # 4ZEFD0861R3313928. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

LABOR DAY SALE -> Extended until 9/30/24! Or while supplies last; in-stock items only.New Load Trail LT-FD Flatbed body only, 8.5' long x 97 inch wide, 58 inch cab to axle, 42 inch frame rail width, 45 inch headache rack height (overall from bottom of frame rails to top of HR), LT 903 - TC, 21k 2.5" rear hitch, 30k GN hitch, will also work for 56-57 inch CA trucks, color: Black. Mfg part # FD970865242SS. Weighs approx 1081 lbs. Serial # 4ZEFD086XR3313927. Will this bed fit my truck?  This is the standard recommendation for a:This bed fits All makes (Ford, Chevy, Ram, etc) IF it is a: - DUAL Rear Wheel- LONG bed (8' long)- 42 inch Frame Rail widthPlease measure your truck to compare & verify. Exclusions & limitations may apply. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

2025 Load Trail DL14 w/ Hydraulic Jack, Dump Trailer Trailer, , 2025 Load Trail DL Dump - 83 x 14 - 7k axles - HYD JACK! - 8" I-Beam Frame <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>GVWR</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">14,000 lbs</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>GAWR</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">7,000 lbs / Axle</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>TONGUE</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">8 I-Beam</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>FRAME</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">8 I-Beam</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>CROSSMEMBERS</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">3-1/2? x 3-1/2? Tubing</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>BED FRAME</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">4? Channel</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>BED CROSSMEMBERS</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">3? Channel</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>AXLES</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">(2) 7,000 lb Dexter 2 Electric NEV-R-ADJUST Brake</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>SUSPENSION</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">Multi-Leaf Spring</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>COUPLER</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2-5/16 Adjustable</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>JACK</b></p>

2025 Load Trail DL14 w/ Hydraulic Jack, Dump Trailer Trailer, , 2025 Load Trail DL Dump - 83 x 14 - 7k axles - HYD JACK! - 8" I-Beam Frame <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>GVWR</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">14,000 lbs</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>GAWR</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">7,000 lbs / Axle</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>TONGUE</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">8 I-Beam</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>FRAME</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">8 I-Beam</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>CROSSMEMBERS</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">3-1/2? x 3-1/2? Tubing</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>BED FRAME</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">4? Channel</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>BED CROSSMEMBERS</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">3? Channel</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>AXLES</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">(2) 7,000 lb Dexter 2 Electric NEV-R-ADJUST Brake</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>SUSPENSION</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">Multi-Leaf Spring</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>COUPLER</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2-5/16 Adjustable</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>JACK</b></p>

2025 Load Trail DL14 w/ Hydraulic Jack 14 PLY TIRE UPGRADE, Dump Trailer Trailer, Bumper Pull, <p>2025 Load Trail DL Dump - 83 x 14 - 7k axles - HYD JACK! - 8" I-Beam Frame</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>GVWR</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">14,000 lbs</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>GAWR</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">7,000 lbs / Axle</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>TONGUE</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">8 I-Beam</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>FRAME</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">8 I-Beam</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>CROSSMEMBERS</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">3-1/2? x 3-1/2? Tubing</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>BED FRAME</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">4? Channel</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>BED CROSSMEMBERS</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">3? Channel</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>AXLES</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">(2) 7,000 lb Dexter 2 Electric NEV-R-ADJUST Brake</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>SUSPENSION</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">Multi-Leaf Spring</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>COUPLER</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">2-5/16 Adjustable</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>JACK

2025 Load Trail DL14 w/ Hydraulic Jack 14PLY TIRE UPGRADE, Dump Trailer Trailer, Bumper Pull, <p>2025 Load Trail DL Dump - 83 x 14 - 7k axles - HYD JACK! 14PLY TIRE UPGRADE- 8" I-Beam Frame</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>GVWR</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">14,000 lbs</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>GAWR</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">7,000 lbs / Axle</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>TONGUE</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">8 I-Beam</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>FRAME</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">8 I-Beam</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>CROSSMEMBERS</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">3-1/2? x 3-1/2? Tubing</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>BED FRAME</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">4? Channel</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>BED CROSSMEMBERS</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">3? Channel</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>AXLES</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">(2) 7,000 lb Dexter 2 Electric NEV-R-ADJUST Brake</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>SUSPENSION</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">Multi-Leaf Spring</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>COUPLER</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">2-5/16 Adjustable</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>J

2025 Load Trail DL14 w/ Hydraulic Jack, Dump Trailer Trailer, Bumper Pull, <p>2025 Load Trail DL Dump - 83 x 14 - 7k axles - HYD JACK! - 8" I-Beam Frame</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>GVWR</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">14,000 lbs</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>GAWR</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">7,000 lbs / Axle</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>TONGUE</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">8 I-Beam</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>FRAME</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">8 I-Beam</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>CROSSMEMBERS</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">3-1/2" x 3-1/2" Tubing</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>BED FRAME</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">4" Channel</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>BED CROSSMEMBERS</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">3" Channel</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>AXLES</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">(2) 7,000 lb Dexter 2 Electric NEV-R-ADJUST Brake</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>SUSPENSION</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">Multi-Leaf Spring</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>COUPLER</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">2-5/16 Adjustable</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>JACK

2025 Load Trail DL14 w/ Hydraulic Jack, Dump Trailer Trailer, Bumper Pull, <p>2025 Load Trail DL Dump - 83 x 14 - 7k axles - HYD JACK! - 8" I-Beam Frame</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>GVWR</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">14,000 lbs</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>GAWR</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">7,000 lbs / Axle</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>TONGUE</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">8 I-Beam</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>FRAME</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">8 I-Beam</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>CROSSMEMBERS</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">3-1/2" x 3-1/2" Tubing</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>BED FRAME</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">4" Channel</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>BED CROSSMEMBERS</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">3" Channel</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>AXLES</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">(2) 7,000 lb Dexter 2 Electric NEV-R-ADJUST Brake</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>SUSPENSION</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">Multi-Leaf Spring</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>COUPLER</strong></p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;">2-5/16 Adjustable</p> <p class="MsoNormal" style="margin-bottom: 0in; line-height: normal;"><strong>JACK

2025 Load Trail CH CH 83x18, Flatbed Trailer Trailer, Bumper Pull, <p>Load Trail Carhauler 18&apos;x83"-Red-16" on center </p> GVWR 9,990 lbs GAWR 5,200 lbs / Axle TONGUE 6 Channel FRAME 6 Channel CROSSMEMBERS 3 Channel, 16 On-center AXLES (2) 5,200 lb Dexter 1 Electric NEV-R-ADJUST Brake SUSPENSION Multi-Leaf Spring COUPLER 2-5/16 Adjustable JACK (1) 10,000 lb Top-wind WHEELS 15 6-Hole Wheels TIRES ST225/75 R15 LRD FENDERS Steel Diamond Plate, Weld-on DECK Straight Deck RAMPS 60 x 22 Slide-In Ramps FLOOR Treated Wood D-RINGS (4) 3 D-rings LIGHTS LED Stop, Tail, & Clearance Lights WIRING 16 Ga 5-Way Double-Insulated Wire Harness PLUG 7-way Cold Weather Cord SAFETY CHAINS (2) 1/4 Grade 30 PRETREATMENT Mechanical and/or Chemical Pretreatment for Maximum Paint Adhesion FINISH (Red) Sherwin-Williams Powdura OneCure, Primer w/Polyester TGIC Gloss Powder TopcoatSteel, 18 x 6.92 x

2025 Load Trail CH CH 83x18, Flatbed Trailer Trailer, Bumper Pull, <p>Load Trail Carhauler 18&apos;x83"-Red-16" on center </p> GVWR 9,990 lbs GAWR 5,200 lbs / Axle TONGUE 6 Channel FRAME 6 Channel CROSSMEMBERS 3 Channel, 16 On-center AXLES (2) 5,200 lb Dexter 1 Electric NEV-R-ADJUST Brake SUSPENSION Multi-Leaf Spring COUPLER 2-5/16 Adjustable JACK (1) 10,000 lb Top-wind WHEELS 15 6-Hole Wheels TIRES ST225/75 R15 LRD FENDERS Steel Diamond Plate, Weld-on DECK Straight Deck RAMPS 60 x 22 Slide-In Ramps FLOOR Treated Wood D-RINGS (4) 3 D-rings LIGHTS LED Stop, Tail, & Clearance Lights WIRING 16 Ga 5-Way Double-Insulated Wire Harness PLUG 7-way Cold Weather Cord SAFETY CHAINS (2) 1/4 Grade 30 PRETREATMENT Mechanical and/or Chemical Pretreatment for Maximum Paint Adhesion FINISH (Red) Sherwin-Williams Powdura OneCure, Primer w/Polyester TGIC Gloss Powder TopcoatSteel, 18 x 6.92 x

2025 Load Trail CH CH 83x18, Flatbed Trailer Trailer, Bumper Pull, <p>Load Trail Carhauler 18&apos;x83"-Red-16" on center </p> GVWR 9,990 lbs GAWR 5,200 lbs / Axle TONGUE 6 Channel FRAME 6 Channel CROSSMEMBERS 3 Channel, 16 On-center AXLES (2) 5,200 lb Dexter 1 Electric NEV-R-ADJUST Brake SUSPENSION Multi-Leaf Spring COUPLER 2-5/16 Adjustable JACK (1) 10,000 lb Top-wind WHEELS 15 6-Hole Wheels TIRES ST225/75 R15 LRD FENDERS Steel Diamond Plate, Weld-on DECK Straight Deck RAMPS 60 x 22 Slide-In Ramps FLOOR Treated Wood D-RINGS (4) 3 D-rings LIGHTS LED Stop, Tail, & Clearance Lights WIRING 16 Ga 5-Way Double-Insulated Wire Harness PLUG 7-way Cold Weather Cord SAFETY CHAINS (2) 1/4 Grade 30 PRETREATMENT Mechanical and/or Chemical Pretreatment for Maximum Paint Adhesion FINISH (Red) Sherwin-Williams Powdura OneCure, Primer w/Polyester TGIC Gloss Powder TopcoatSteel, 18 x 6.92 x

2025 Load Trail CH CH 83x18, Flatbed Trailer Trailer, Bumper Pull, <p>Load Trail Carhauler 18&apos;x83"-Red-16" on center </p> GVWR 9,990 lbs GAWR 5,200 lbs / Axle TONGUE 6 Channel FRAME 6 Channel CROSSMEMBERS 3 Channel, 16 On-center AXLES (2) 5,200 lb Dexter 1 Electric NEV-R-ADJUST Brake SUSPENSION Multi-Leaf Spring COUPLER 2-5/16 Adjustable JACK (1) 10,000 lb Top-wind WHEELS 15 6-Hole Wheels TIRES ST225/75 R15 LRD FENDERS Steel Diamond Plate, Weld-on DECK Straight Deck RAMPS 60 x 22 Slide-In Ramps FLOOR Treated Wood D-RINGS (4) 3 D-rings LIGHTS LED Stop, Tail, & Clearance Lights WIRING 16 Ga 5-Way Double-Insulated Wire Harness PLUG 7-way Cold Weather Cord SAFETY CHAINS (2) 1/4 Grade 30 PRETREATMENT Mechanical and/or Chemical Pretreatment for Maximum Paint Adhesion FINISH (Red) Sherwin-Williams Powdura OneCure, Primer w/Polyester TGIC Gloss Powder TopcoatSteel, 18 x 6.92 x

2024 Load Trail 77" x 12', Utility Trailer Trailer, Bumper Pull, 2024 Load Trail 77" x 12&apos; Landscape/Utility Trailer - Single Axle - 3500 lb Axle <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>GVWR</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2,990 lbs</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>GAWR</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">3,500 lbs/axle</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>TONGUE</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">3? Channel</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>FRAME</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? x 3? x 3/16? Angle Iron</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>CROSSMEMBERS</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? x 3 Angle Iron, 24 On-center</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>AXLES</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">(1) 3,500 lb Dexter Idler</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>SUSPENSION</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">Multi-Leaf Spring</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>COUPLER</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? A-frame</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>JACK</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">(1) 2,000 lb Top-wind</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>WHEELS</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">15 5Hole Wheels</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>TIRES</b></p>

2024 Load Trail 77" x 12', Utility Trailer Trailer, Bumper Pull, 2024 Load Trail 77" x 12&apos; Landscape/Utility Trailer - Single Axle - 3500 lb Axle <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>GVWR</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2,990 lbs</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>GAWR</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">3,500 lbs/axle</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>TONGUE</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">3? Channel</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>FRAME</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? x 3? x 3/16? Angle Iron</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>CROSSMEMBERS</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? x 3 Angle Iron, 24 On-center</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>AXLES</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">(1) 3,500 lb Dexter Idler</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>SUSPENSION</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">Multi-Leaf Spring</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>COUPLER</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? A-frame</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>JACK</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">(1) 2,000 lb Top-wind</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>WHEELS</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">15 5Hole Wheels</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>TIRES</b></p>

2024 Load Trail 77" x 12', Utility Trailer Trailer, Bumper Pull, 2024 Load Trail 77" x 12&apos; Landscape/Utility Trailer - Single Axle - 3500 lb Axle <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>GVWR</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2,990 lbs</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>GAWR</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">3,500 lbs/axle</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>TONGUE</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">3? Channel</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>FRAME</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? x 3? x 3/16? Angle Iron</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>CROSSMEMBERS</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? x 3 Angle Iron, 24 On-center</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>AXLES</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">(1) 3,500 lb Dexter Idler</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>SUSPENSION</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">Multi-Leaf Spring</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>COUPLER</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? A-frame</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>JACK</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">(1) 2,000 lb Top-wind</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>WHEELS</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">15 5Hole Wheels</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>TIRES</b></p>

2024 Load Trail 77" x 12', Utility Trailer Trailer, Bumper Pull, 2024 Load Trail 77" x 12&apos; Landscape/Utility Trailer - Single Axle - 3500 lb Axle <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>GVWR</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2,990 lbs</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>GAWR</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">3,500 lbs/axle</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>TONGUE</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">3? Channel</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>FRAME</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? x 3? x 3/16? Angle Iron</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>CROSSMEMBERS</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? x 3 Angle Iron, 24 On-center</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>AXLES</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">(1) 3,500 lb Dexter Idler</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>SUSPENSION</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">Multi-Leaf Spring</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>COUPLER</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? A-frame</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>JACK</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">(1) 2,000 lb Top-wind</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>WHEELS</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">15 5Hole Wheels</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>TIRES</b></p>

2024 Load Trail 77" x 12', Utility Trailer Trailer, Bumper Pull, 2024 Load Trail 77" x 12&apos; Landscape/Utility Trailer - Single Axle - 3500 lb Axle <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>GVWR</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2,990 lbs</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>GAWR</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">3,500 lbs/axle</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>TONGUE</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">3? Channel</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>FRAME</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? x 3? x 3/16? Angle Iron</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>CROSSMEMBERS</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? x 3 Angle Iron, 24 On-center</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>AXLES</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">(1) 3,500 lb Dexter Idler</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>SUSPENSION</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">Multi-Leaf Spring</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>COUPLER</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? A-frame</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>JACK</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">(1) 2,000 lb Top-wind</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>WHEELS</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">15 5Hole Wheels</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>TIRES</b></p>

2024 Load Trail 77" x 12', Utility Trailer Trailer, Bumper Pull, 2024 Load Trail 77" x 12&apos; Landscape/Utility Trailer - Single Axle - 3500 lb Axle <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>GVWR</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2,990 lbs</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>GAWR</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">3,500 lbs/axle</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>TONGUE</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">3? Channel</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>FRAME</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? x 3? x 3/16? Angle Iron</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>CROSSMEMBERS</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? x 3 Angle Iron, 24 On-center</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>AXLES</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">(1) 3,500 lb Dexter Idler</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>SUSPENSION</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">Multi-Leaf Spring</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>COUPLER</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">2? A-frame</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>JACK</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">(1) 2,000 lb Top-wind</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>WHEELS</b></p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal">15 5Hole Wheels</p> <p class="MsoNormal" style="margin-bottom: 0in;line-height: normal"><b>TIRES</b></p>