New Knucklebooms Trucks For Sale Near sweetwater, Tennessee

<p>2014 FL WITH 12' BED AND A PM18 KNUCKLE BOOM </p><p>GOOD RUNNING TRUCK JUST A LITTLE SMALL FOR WHAT WE DO</p><p>WE ARE CURRENTLY STILL USING SO THE MILAGE WILL GO UP </p><p>THE TRUCK WILL BE SOLD AS IS WHERE IS.</p>

2015 HIAB 255K-3 HiPro Crane mounted on a 24'6" bed. New sideboxes and tires. 2015 International PayStar 5900 with LOW MILEAGE - 124,308. Used as a sheetrock and shingle boomtruck by small lumber company. Has many years left in it for booming deliveries or could be easily adapted as a log loader or for other booming needs.

2008 EFFER, 310.11/6S, Cranes - Knuckle Boom Cranes - Mounted, , Automatic, -2008 International 7400 Single Cab Heavy Duty Crane Truck -Only 17K Accurate Original Miles / 1500 Engine Hours!!! -International Maxxforce 9 9.3L turbo diesel engine -Allison 5 Speed Automatic Transmission -EFFER 310.11 6S Knuckleboom Crane w/ Wireless Controller -23150LB capacity at 7'8" out / 2645LB capacity at 55'7" out -4 fully hydraulic rear outriggers -16' Steel Flatbed Body -Air Brakes -58000 GVWR -Previous fleet maintained & serviced -*NEW* front engine mount bushings, fixed misc lights, engine oil & filter ($902 spent mechanical parts & labor) -Please view all 152 pictures and attached video! -Shipping available to all of USA! Contact us for a quote! -Ready to go to work! Beautiful running, driving and operating LOW mileage & LOW hour truck! This truck is in good condition and runs, drives, and operates just as it should! The International Maxxforce 9 9.3L turbo diesel starts right up and sounds great with no issues. The Allison 5 speed automatic transmission shifts good and goes through all gears nicely. The EFFER 310.11 6S crane is functioning just as it should via wireless remote (truck has manual controls as well). The PTO to control crane is activated by a control panel mounted PTO switch. This is a large capacity knuckle boom which appears to be functioning 100% with no major leaks or damage. It operates nicely with no hiccups or issues. The (4) hydraulic outriggers function as they should. The 16' flatbed is in great condition and appears to have little to no rust. The trucks exterior shows very minimal light use and is in excellent condition. The interior shows well and is clean with no excessive wear. The seats do not have any major rips or tears. The frame and underside of the truck is in beautiful condition and no major rust or issues present. The frame is in the original condition with no sandblasting or undercoating done by us. There are no warning lights illuminated on the dash. All tires are in good condition with good tread left. The truck runs and drives nicely down the road with no areas of concern. It appears this truck was maintained and owned correctly - it is ready to go back into service immediately. A very expensive truck new! At 17K original miles & low hours this truck has a lot of life left and should serve its next owner well. Please view all pictures and attached video for an accurate representation of the truck. We are located in Clarksville, Maryland 21029. For any further questions or a shipping quote feel free to contact us. Thank you for looking., Horse Power, Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN 1HTWGAZT78J650526

46,000 lb rear axels<br>20,000 lb front axel<br>20,000 lb  steer tag axel<br><br>Low mileage 32,255<br><br>Atlas 300.1 A24 crane with seat<br>controls and radio remote controls.<br>Hydralic fork rotation. 74’ Verticle<br>reach and 62’ Horizontal reach.<br>Comes with rotating hook assembly.<br><br>

<p>1999 International Paystar 5000 knuckle boom truck w/ 22'-6" steel flat bed, CAT 3406 motor, 455 hp, Jake brake, Eaton Fuller 8LL Trans, 4:88 rear ratio, 20,000 lb front axle, 20,000 lb non-steerable lift axle, 46,000 lb rear axles, Double Frame, Hendrickson spring suspension, 264" whl base, diff lock, cruise, PW RH window, 425/65R 22.5 front tires, 11R24.5 rear tires, Hiab 300-4 Knuckle boom Crane w/ radio remote, Chart shows 26500 lbs at 6'-11", and 1480 lbs at 75'-2" - Truck has low 289K original miles - Inspected til 8/25 - Truck and crane are in excellent shape!!!</p>

2006 PALFINGER, PK15002B, Cranes - Knuckle Boom Cranes - Mounted, , Automatic, AUTOMATIC TRANS, 11R22.5 TIRES, WALKING BEAM SUSPENSION, PTO, REAR MOUNT 3 SECTION BOOM, PALFINGER PALTRONIC50 LOAD MOMENT IDICATOR, STRAIGHT DOWN OUTRIGGERS, 18 FT X 96 INCH BED, see crane specs attached<br/>, Horse Power, Suspension, Wheels, Wheel Base, , Rear Axle lbs, Ratio, , VIN

2005 HIAB, 300-6, Cranes - Knuckle Boom Cranes - Mounted, , 10 Spd, -2005 Freightliner M2 112 Single Cab Tandem Axle W/ Air Drop Flatbed Knuckleboom -181K Miles / 11666 Engine Hours Showing -Mercedes Benz MBE4000 12.8L 410HP Turbo Diesel -Eaton 10 Speed Manual Transmission -HIAB 300-6 49'10" Hydraulic Reach Knuckleboom Crane w/ 6 Stages & 26,400LB Max Capacity -22' X 100" Steel Deck Flatbed -Pallet Fork Attachment -Hydraulic Outriggers -GVWR 74,000 -*NEW* (3) batteries, new L+R front drums & shoes, serp belt, EGR valve, oil sender, traverse rod, spring bushings axle 2, drop axle air bags, misc lights fixed, engine oil & filter ($10,317 spent mechanical parts & labor) -Fleet Serviced & Maintained -Please view all 126 pictures and attached video!! -Shipping available to all of USA! Contact us for a quote! Hard to find large capacity large reach flatbed HIAB knuckleboom truck that runs, drives and operates as it should. This truck is mechanically sound and ready to work. PRE-EMISSIONS NO DEF! The Mercedes Benz MBE4000 12.8L 410HP turbo diesel starts right up with no issues, sounds great with excellent power. Very reliable engine! The Eaton 10 speed manual transmission shifts through all gears nicely. This truck is clean and very presentable for the miles/year. The frame and underside is very clean with minor surface rust. Some minor peeling and light surface rust but no major rot or areas of concern. The exterior of the truck is in overall good condition with minor damages and flaws to be expected. It was a very nice truck when it came in that did not need much mechanical/cosmetic work. We did paint the exterior/topside of the flatbed which shows extremely well. The steel flatbed deck is in solid condition with no major wear showing. The interior is clean with only light wear showing, no major rips or tears in the seats. The Hiab 300-6 hydraulic knuckleboom operates as it should via driver control station. It has a max capacity of 26,400 and a hydraulic reach of 49'10. It has two full power hydraulic outriggers installed that function as they should. This truck appears to have been lightly used and well taken care of. All tires are appear to be in good, workable condition with plenty of tread left. This truck runs, drives, and stops as it should. It has been mechanically checked and serviced. Hop in this truck and get right to work! Please view all pictures and attached video for an accurate representation of the truck. We are located in Clarksville, Maryland 21029. For any further questions or a shipping quote feel free to contact us. Thank you for looking., Horse Power, Air Ride Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN 1FVHC5CV85HN27554

2006 PALFINGER, PK21502, Cranes - Knuckle Boom Cranes - Mounted, 2006 Sterling L9500 14' Flatbed Knuckle Boom Crane Truck, Caterpillar C11, Allison 4500RDS Auto Transmission, Only 11,682 Miles, Only 357 Crane Hours, 39,000 GVW, A/C, Palfinger-PK-21502 Crane Lift W/ Dual Operation Stations, 18,740 lbs Max Lifting Capacity, 70' Hydraulic Reach, KINSHOFER KM 04S Rotator with KM 613HPX-HD Rock Grab and Clamshell Bucket, Palfinger KBW006-AA Winch (5,000 lbs), Wireless Remote, Toolboxes, Job Box, 12' Removable Stake Sides, Front Bumper Winch with Capstan (20,000 lbs Line Pull), 14' Flatbed, Hydraulic Outriggers (4), Well-Maintained Ex-Gov't Unit

<p><strong>2006 GMC C8500 National N80 Knuckleboom Flatbed Truck</strong></p><p>Year: 2006</p><p>Make: GMC</p><p>Model: C8500</p><p>Vin: XXXXXXXXXXXXX3715</p><p>144,778 Miles</p><p>Engine: Caterpillar C7 Diesel</p><p>Transmission: Manual 6 Speed</p><p>TIRES: FRONT ( APPROX. 80 TO 90% TREAD) REAR ( APPROX. 80 TO 90% TREAD)</p><p>Equipment: National N80 Knuckleboom  Flatbed Truck</p><p>436 Hours</p><p>14 Feet Flatbed</p><p>14,398 lbs. Knuckleboom Crane mounted behind cab</p><p>15 GPM Tuthill Pump</p><p>CONDITION: CLEAN OVERALL!</p><p>RUNS, DRIVES AND OPERATES EXCELLENT!</p>

<p><strong>2006 Ford F-750 IMT Knuckleboom Flatbed Utility Truck</strong></p><p>Year: 2006</p><p>Make: Ford</p><p>Model: F-750 XL Super Duty</p><p>Vin: XXXXXXXXXXXXX4288</p><p>88,828 Miles</p><p>9,253 Hours</p><p>Engine: Caterpillar C7 / 7.2L Diesel</p><p>Transmission: Manual 6 Speed</p><p>TIRES: FRONT ( APPROX. 80 TO 90% TREAD) REAR ( APPROX. 80 TO 90% TREAD)</p><p>Equipment: IMT Material Handling Systems 11/76 Series</p><p>Model: 11/76K3</p><p>Serial: 761135</p><p>6,835 LBS.</p><p>39 Feet Knuckleboom</p><p>2 Riggers</p><p>13 FT Flatbed Utility Body</p><p>CONDITION: CLEAN OVERALL!</p><p>RUNS, DRIVES AND OPERATES EXCELLENT!</p><p>HISTORY: Fleet Vehicle</p>

Located in Omaha, NE. FET is additional. <strong>2023 WESTERN STAR 47X SF</strong> <ul><li>370 HP Cummins L9</li><li>Allison 3000 RDS automatic transmission</li><li>Airliner 46,000 lb rear suspension</li><li>80 gallon fuel tank</li><li>Alcoa wheels</li><li>60,000 lb GVWR (20,000 lb front axle; 40,000 lb rear tandem)</li><li>31,850 lb vehicle weight (16,280 lb front axle; 15,300 lb rear tandem axle)</li></ul> <strong>PALFINGER 33002-EH ARTICULATED CRANE</strong> <ul><li>31.3 metric ton (224,940 ft-lb) rated crane</li><li>6-section hydraulic boom with 55’1″ reach and high angle boom monitoring</li><li>Power Link Plus – outer boom tilts 15 degrees above horizontal</li><li>Hydraulic winch with 5,513 lb rating on first layer and 183’7″ of 1/2″ rotation resistant rope</li><li>Hydraulic outriggers with 24’3″ span and LED lighting</li><li>400 degree rotation</li><li>Wireless remote controls and ground controls</li></ul> <strong>SCOTT TAFCO MAGNUM ALUMINUM FLATBED</strong> <ul><li>Heavy duty all-aluminum flatbed</li><li>20′ long x 102″ wide</li><li>Non-skid aluminum flooring</li><li>Rubrail with stake pockets (stake racks available)</li><li>Solid bulkhead</li><li>Pull plate with rear hitch</li><li>Winch track</li></ul>

2018 HIAB, X-HIPRO 352E5 Cranes - Knuckle Boom Cranes - Un-Mounted, 2018 HIAB KNUCKLEBOOM MODEL 352E-5X-HIPRO, 10 TON, PICKS 20,710 LB AT 10'5\' SIDE REACH, PICKS 1,710 LB AT 64'7\' MAX SIDE REACH, 72' MAX VERTICAL REACH, 5 HYD EXT ON OUTER BOOM + FLY JIB W/ 2 HYD EXT, LMI SYSTEM, RADIO REMOTE CONTROLS, 2 HYD OUT + DOWN OUTRIGGERS, HYD TANK, NO PUMP. **CRANE HIT HIGH VOLTAGE LINE, FOR PARTS OR REPAIR - DO NOT USE AS PER HIAB** ***BUYER WILL SIGN RELEASE THAT CRANE MUST BE REPAIRED AS PER HAIB INSTRUCTIONS BEFORE USE***Serial Number: 3520107

2011 IMT, 5/33, Cranes - Knuckle Boom Cranes - Mounted, , Automatic, 4,065 lb IMT 5-33 Knuckleboom mounted behind cab, hyd outriggers, 12' aluminum body, storage boxes, rumber floor. PLEASE WATCH THE VIDEO. Price includes service as needed, everything working, and a $75 doc fee., Horse Power, Spring Suspension, Wheels, 201 Wheel Base, , Axle, Ratio, , VIN 641030

2018 VOLVO VHD 648, ,FOR SALE! A USED 2018 Tri Rotobec Elite 910 Grapple Truck. This unit includes a 500 HP Volvo D13 12.8L engine, and a Spicer ATO2612F 12 transmission. Additional inspection observations included: A/C not cold. The unit is sold as-is, where-is in Memphis, TN. Ask about our preferred transportation vendors! We also offer a wide range of flexible, easy-to-use lease or loan options on select equipment. Additional notes, reports, and videos can be found by clicking on the circle "inspection" icon below.

2018 VOLVO VHD 648, ,FOR SALE! A USED 2018 Tri Rotobec Elite 910 Grapple Truck. This unit includes a 500 HP Volvo D13 12.8L engine, and a Spicer ATO2612F 12 transmission. Additional inspection observations included: A/C not cold. The unit is sold as-is, where-is in Memphis, TN. Ask about our preferred transportation vendors! We also offer a wide range of flexible, easy-to-use lease or loan options on select equipment. Additional notes, reports, and videos can be found by clicking on the circle "inspection" icon below.