Used Digger Derrick Trucks For Sale Near three rivers, Ohio

<p>2009 Freightliner, M2 Truck</p><p>Altec D3055-TR, 27,680 Lb Hydraulic Crane s/n 0908CM0371, with 55 ft. sheave height, 3 section hyd boom, heel winch, remote, stand up controls & 4 hyd outriggers, rear mounted on 2009 Freightliner M2 106 T/A Utility Truck, Cummins 8.3L diesel, Auto.</p><p>Previous Energy Company unit. Drove here from Alabama like a champ</p>

<p>This is a 47′ Altec DM47B-TR rear mounted on a 2013 Freightliner M2 4X2. This truck is powered by an ISB 6.7L Cummins diesel engine and a 6-speed Allison Automatic transmission. SR# 4342</p>

2015 FORD F750, ,2015 Ford F750 Terex Commander 4047 Digger Derrick. Terex C4047, 47.4 ft max sheave height, 24,750 lbs max capacity. Starts and drives. Mileage 66,390. 260 hp Cummins ISB 6.7L diesel motor with 6,603 engine hours. Allison 3500RDS automatic transmission. GVWR 33k lbs. 4 INACTIVE FAULTS DETECTED - (SEE ECM REPORT). Unit sold as-is where-is in Jackson, MI. Inspection completed by a non-bias, qualified, 3rd party. Additional findings, videos, and photos can be found on the circle inspection icon below. Financing and transportation available.

2015 Freightliner M2106, ,2015 Freightliner M2106 4x4, 63,135 Miles, 33,000 Lbs. GVWR, 14,000 Lbs. FAWR, 21,000 Lbs. RAWR, Cummins ISB Engine, 250 Horsepower, Allison 3500RDS Transmission, 2014 Terex C4047 Digger Derrick, 10,060 Lbs. @ 9.6 Ft. Load Radius, 47 Ft. Sheave Height, 37 Ft. Horizontal Reach, 34.3 Ft. Digging Radius, 300 Lbs. Platform Capacity, Tip Mounted Winch, 360 Degree Rotation, Insulated 46KVAC Category C, T-Body, Unit Being Sold As-Is/Where-Is, Qualifies For An Extended Warranty! Located In Bakersfield, CA

2012 Ford F750, ,2012 Ford F750 4x2, 146,420 Miles, 33,000 Lbs. GVWR, 13,200 Lbs. FAWR, 21,000 Lbs. RAWR, Cummins ISB Engine, 260 Horsepower, Allison 3000RDS Transmission, Terex C4047 Digger Derrick, 47 Ft. Sheave Height, 37.5 Ft. Horizontal Reach, 26 Ft. Digging Radius, 15,000 Lbs. Turnable Winch, Insulated 46KVAC Category C, Line Body, Unit Being Sold AS-IS/WHERE-IS, Qualifies For An Extended Warranty! Located In Bakersfield, CA

<p>2016 Freightliner Altec DC47-TR Digger Derrick, 2016 Freightliner M2 106, Cummins Diesel, Altec Digger Derrick DC47-TR, 76,794 Miles, Allison Automatic, Air Conditioning, 3 stage digger, 47’ sheave height, 25,085# capacity, riding controls, pole claws, 4 outriggers, Multi-Lever Control Station Riding Seat, Five Function Hydraulic Overload Protection System (HOP), Fiberglass Boom Tip and Transferable Steel Boom Flares, Insulating Fiberglass Third Stage, Rated to 46kV and Below, Hydraulic Side Load Protection, 15,000 lb Worm Gear Turntable Winch with Rope Guides, Hydraulic Tilting Pole Guides with Interlock, 12,000 ft-lbs Digger Motor, Two Speed Mechanical Shift, Hydraulic Auger Release, Boom and Auger Stow Protection.</p>

<p>2011 Freightliner M2 Altec Digger Derrick</p><p>Chassis</p><ul><li>Freightliner M2</li><li>Cummins 6.7</li><li>110,529 miles</li><li>Allison Automatic Transmission</li><li>Air Conditioning</li><li>Air Brakes</li><li>Single Axle</li><li>DOT'd and Serviced</li><li>Lots Of Recent Work Done To The Chassis</li><li>Truck Runs and Drives Good</li></ul><p>Upfit</p><ul><li>DM47-BR </li><li>3 Stage boom</li><li>47' Sheave Height</li><li>24,660# Capacity</li><li>Riding Controls</li><li>Tip Controls with Pin on Bucket Option</li><li>4 Outriggers</li><li>Steel Body</li><li>Boom Works Like It Should, Ready To Go To Work.</li></ul><p> </p><p> </p>

2009 International Altec DM47, 2009 International 4400, Maxxforce 7.6L diesel, 122,646 Miles, Auto, A/C, Altec DM47 Digger Derrick, with 47' sheave height, 3 section hyd boom, 2 spd digger, riding controls and 4 hyd outriggers, former major telephone company, VIN 1HTMMAAN19H052969

2018 ALTEC, DC47TR, Cranes - Digger Derricks - Truck-Mounted, , Automatic, 2019 ALTEC DC47TR Unit Specifications Unit Serial Number: 1218EU3526 Unit Manufacturer: ALTEC Unit Model: DC47TR Unit Year: 2018 Unit Mount: OVER REAR AXLE Winch: TURRET Platform: N/A Upper Controls: YES Digger Description: TWO SPEED Boom Classification: Insulating Primary Stabilizer: A-FRAME OUTRIGGER Auxiliary Stabilizer: A-FRAME OUTRIGGER Chassis Specifications Chassis Year: 2019 Chassis Manufacturer: FREIGHTLINER Chassis Model: M2-106 Chassis Mileage: 47,899 Chassis VIN: 3ALDCXFC7KDKP2868 Fuel Type: DIESEL Engine Model: CUMMINS;DIESEL;250;74392925 Transmission Type: AUTOMATIC Brake Type: AIR GVWR: 33,000 lb Drive Train: 4x4 Body Model: BSLS-154-120 Under CDL: No, Horse Power, Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN 1218EU3526

2017 ALTEC, DM47BTR, Cranes - Digger Derricks - Truck-Mounted, , Automatic, 2018 ALTEC DM47B-TR Unit Specifications Unit Serial Number: 1017FR3650 Unit Manufacturer: ALTEC Unit Model: DM47B-TR Unit Year: 2017 Unit Mount: OVER REAR AXLE Winch: TURRET Platform: N/A Digger Description: TWO SPEED Boom Classification: Insulating Primary Stabilizer: A-FRAME OUTRIGGER Auxiliary Stabilizer: A-FRAME OUTRIGGER Chassis Specifications Chassis Year: 2018 Chassis Manufacturer: FREIGHTLINER Chassis Model: M2 Chassis Mileage: 65,417 Chassis VIN: 3ALACXFC8JDJS9011 Fuel Type: DIESEL Engine Model: CUMMINS;DIESEL;260;74176952 Transmission Type: AUTOMATIC Brake Type: AIR GVWR: 33,000 lb Drive Train: 4x2 Body Model: BSLS-142-120 Under CDL: No, Horse Power, Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN 1017FR3650

2017 ALTEC, DM47BTR, Cranes - Digger Derricks - Truck-Mounted, , Automatic, 2018 ALTEC DM47B-TR Unit Specifications Unit Serial Number: 0817FR3537 Unit Manufacturer: ALTEC Unit Model: DM47B-TR Unit Year: 2017 Unit Mount: OVER REAR AXLE Winch: TURRET Platform: N/A Upper Controls: YES Digger Description: TWO SPEED Boom Classification: Insulating Primary Stabilizer: A-FRAME OUTRIGGER Auxiliary Stabilizer: A-FRAME OUTRIGGER Chassis Specifications Chassis Year: 2018 Chassis Manufacturer: FREIGHTLINER Chassis Model: M2 Chassis Mileage: 64,987 Chassis VIN: 3ALACXFC9JDJN3981 Fuel Type: DIESEL Engine Model: CUMMINS;DIESEL;260;74150255 Transmission Type: AUTOMATIC Brake Type: AIR GVWR: 33,000 lb Drive Train: 4x2 Body Model: BSLS-142-120 Under CDL: No, Horse Power, Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN 0817FR3537

2008 INTERNATIONAL PAYSTAR 4WD DIGGER TRUCK

2008 INTERNATIONAL 7400 DERRICK DIGGER TRUCK

2006 INTERNATIONAL 4400 DT466 ALLISON AUTOMATIC, AIR BRAKE

2006 GMC C8500 ALTEC DM45 DIGGER TRUCK, 7.8L DURAMAX, ALLISON AUTOMATIC, AIR BRAKE, FRONT WINCH, 52K MILES - MORE PICS TO COME

2019 Versalift TMD-4060T, 2019 International 7400 6x6 with a Cummins Diesel Engine, 300 HP and Allison Transmission, 60' Sheave Height, Insulated Digger Derrick with a 30,000 lb Capacity.

<p>This is a 47′ Altec DM47B-TR on a 2016 Freightliner M2 106 chassis. This truck is equipped with a Cummins 6.7L diesel engine, boasting just 66,226 miles, and is complemented by an Allison automatic transmission for reliable performance the truck has a Muncie PTO located on the drivers side. Thes boom features a 23,790 lb capacity, 3 section boom has a 47′ sheave height, pole claws, and rear winch.</p> <strong>Vehicle Specifications</strong> <p><strong>Year:</strong></p><p>2016</p><p><strong>Make:</strong></p><p>Freightliner</p><p><strong>Model:</strong></p><p>M2 106</p><p><strong>Brakes:</strong></p><p>Air</p><p><strong>Engine:</strong></p><p>Cummins 6.7L Diesel Engine (SN- 73793480)</p><p><strong>Miles:</strong></p><p>66,226</p><p><strong>Front Axle:</strong></p><p>13,220</p><p><strong>Rear Axle:</strong></p><p>21,0000 lbs (Meritor)</p><p><strong>GVWR:</strong></p><p>33,000</p><p><strong>Wheels:</strong></p><p>10 Hole Motor</p><p><strong>Front Tires:</strong></p><p>11R 22.5</p><p><strong>Rear Tires:</strong></p><p>11R 22.5</p><p><strong>CA CT:</strong></p><p>122"</p><p><strong>Other:</strong></p><p>A/C, AM/FM Radio, 1 Bucket Seat & 1 Bench Seat, 1 Strobe Light, 1-50 Gallon Fuel Tank, Pintle Hitch, Trailer Brakes</p><p><strong>Transmission:</strong></p><p>Allison 5-speed Allison Automatic Transmission (SN- 6511282825)</p><p><strong>Hours:</strong></p><p>2,630</p><p><strong>Stock Number:</strong></p><p>4400</p><p><strong>Horsepower:</strong></p><p>250</p> <strong>Equipment Specifications</strong> <p><strong>Make:</strong></p><p>Altec</p><p><strong>Model:</strong></p><p>DM47B-TR</p><p><strong>Serial #:</strong></p><p>0315FR1774</p><p><strong>Sheave Height:</strong></p><p>47'</p><p><strong>Work Height:</strong></p><p>47'</p><p><strong>Kelly Bar(in):</strong></p><p>2-1/2</p><p><strong>Capacity:</strong></p><p>23,790</p><p><strong>Mount:</strong></p><p>Center over rear wheel</p><p><strong>Insulated:</strong></p><p>Yes</p><p><strong>Hours:</strong></p><p>TBD</p><p><strong>Out Riggers:</strong></p><p>4</p><p><strong>Other:</strong></p><p>Joystick Controls, Tool Circuits, Hydraulic Hose Reel</p>

<p>This is a 47′ Altec DM47B-TR on a 2016 International Workstar 7300 4×4 chassis. This truck is equipped with a Maxxforce DT diesel engine, boasting only 41,000 miles, and is complemented by a 5-speed Allison automatic transmission for reliable performance. The truck features a 13,000lbs Fabco front axle and a 20,000lbs Blue Diamond rear axle for a total of a 33,000lbs GVWR. The boom features a 23,790 lb capacity, 3 section boom has a 47′ sheave height, and pole claws.</p><p> </p> <strong>Vehicle Specifications</strong> <p><strong>Year:</strong></p><p>2016</p><p><strong>Make:</strong></p><p>International</p><p><strong>Model:</strong></p><p>7300 4x4</p><p> </p><p><strong>Brakes:</strong></p><p>Air</p><p><strong>Engine:</strong></p><p>Maxxforce DT Diesel</p><p><strong>Miles:</strong></p><p>41,366</p><p><strong>Front Axle:</strong></p><p>13,000</p><p><strong>Rear Axle:</strong></p><p>20,000</p><p><strong>Front Tires:</strong></p><p>11R 22.5</p><p><strong>Rear Tires:</strong></p><p>11R 22.5</p><p><strong>CA CT:</strong></p><p>128"</p><p><strong>Horsepower:</strong></p><p>260</p><p><strong>Hours:</strong></p><p>4,404</p><p><strong>Wheels:</strong></p><p>10 Hole Motor</p><p><strong>Other:</strong></p><p>A/C, AM/FM/Bluetooth Radio, 1 Bucket Seat & 1 Bench Seat, 2 Strobe Lights, Pintle Hitch, Trailer Brakes</p><p><strong>Transmission:</strong></p><p>5-speed Allison automatic transmission (SN- 6511281726)</p><p><strong>GVWR:</strong></p><p>33,000</p><p><strong>Stock Number:</strong></p><p>4401</p> <strong>Equipment Specifications</strong> <p><strong>Make:</strong></p><p>Altec</p><p><strong>Model:</strong></p><p>DM47B-TR</p><p><strong>Serial #:</strong></p><p>0215FR1741</p><p><strong>Hours:</strong></p><p>1,911</p><p><strong>Sheave Height:</strong></p><p>47'</p><p><strong>Capacity:</strong></p><p>23,790</p><p><strong>Mount:</strong></p><p>Center Over Axle</p><p><strong>Insulated:</strong></p><p>Yes- 46 kV and Below</p><p><strong>Kelly Bar(in):</strong></p><p>2.5"</p><p><strong>Out Riggers:</strong></p><p>4</p><p><strong>Other:</strong></p><p>Lever Controls, Tool Circuits, Hydraulic Hose Reel</p>

This is a Texoma 650-50 pressure digger mounted on a 2014 Peterbilt 348 chassis.  The truck is powered by a Cummins engine and driven by a 6-speed Allison 3500 automatic transmission. This unit offers 650 Texoma reliability and power with a 50′ digging depth.  It is a one owner machine that was sold new by Sunrise Equipment.  This pressure digger is in work ready condition. SR# 3975

<p>This is a 50′ Terex Commander C5050 on a 2012 International 7600 6×4 chassis. This truck is equipped with a 390 HP MaxxForce 11 diesel engine, boasting just 30,000 miles, and is complemented by a 6-speed Allison automatic transmission for reliable performance. This truck has a front bumper winch with capstan, directional bar on the rear, backup camera, air hose reel and double gearbox steering. The boom features a 30,000 lb capacity, 3 section boom has a 50′ sheave height, pole claws, and rear winch. This truck has extremely low hours showing only 2,751 engine hours and 1,287 PTO hours. The rear suspension of this truck features a Hendrickson leaf suspension system, with the inner and rear axles rated for a maximum capacity of 46,000 lbs and 6.14 axle ratio.</p><p> </p> <strong>Vehicle Specifications</strong> <p><strong>Year:</strong></p><p>2012</p><p><strong>Make:</strong></p><p>International</p><p><strong>Model:</strong></p><p>7600 SBA 6x4</p><p><strong>Brakes:</strong></p><p>Air</p><p><strong>Engine:</strong></p><p>10.9L MaxxForce 11 Diesel Engine (SN- 1S106HM2Y4115535)</p><p><strong>Miles:</strong></p><p>30,707</p><p><strong>Front Axle:</strong></p><p>16,000 lb</p><p><strong>Rear Axle:</strong></p><p>20,000 lb Meritor Inner & 20,000 Meritor Rear</p><p><strong>GVWR:</strong></p><p>56,000</p><p><strong>Wheels:</strong></p><p>10 Hole Motor</p><p><strong>Front Tires:</strong></p><p>315-80 22.5</p><p><strong>Rear Tires:</strong></p><p>11R 22.5</p><p><strong>CA CT:</strong></p><p>152"</p><p><strong>Other:</strong></p><p>A/C, AM/FM Radio, 2 Bucket Seats, 1 Spotlight, Inverter, 1-70 Gallon Fuel Tank, Pintle Hitch, Trailer Brakes</p><p><strong>Horsepower:</strong></p><p>390 HP</p><p><strong>Transmission:</strong></p><p>Allison 6-speed automatic (SN 6610319572)</p><p><strong>Hours:</strong></p><p>2,751</p><p><strong>Stock Number:</strong></p><p>4392</p> <strong>Equipment Specifications</strong> <p><strong>Make:</strong></p><p>Terex</p><p><strong>Model:</strong></p><p>Commander C5050</p><p><strong>Serial #:</strong></p><p>2110143246</p><p><strong>Year:</strong></p><p>2011</p><p><strong>Sheave Height:</strong></p><p>50'</p><p><strong>Kelly Bar(in):</strong></p><p>2-5/8"</p><p><strong>Capacity:</strong></p><p>30,000 lbs</p><p><strong>Mount:</strong></p><p>Center Over Rear Axle</p><p><strong>Insulated:</strong></p><p>Yes</p><p><strong>Hours:</strong></p><p>1,287</p><p><strong>Other:</strong></p><p>Tool Circuits, A/C Power, Hydraulic Hose Reel, Air Hose Reel, Van Air Compressor (PTO Driven)</p><p><strong>Out Riggers:</strong></p><p>4</p><p><strong>Work Height:</strong></p><p>50'</p>

2012 Terex Commander 4047, 2012 International 7300 4x4 with a Diesel Engine and an Automatic Transmission with a Terex Commander 4047, Insulated, 47' Sheave Height Digger Derrick.

This is a Texoma 800-95 pressure digger with 95 foot digging depth mounted on a 2010 Peterbilt 367 Tri-Drive chassis.  The truck is powered by a ISX500 Cummins Diesel engine and an 18 speed transmission. This chassis on this truck is double framed. The drill rig is powered by a John Deere 6068 engine and an Allison Powershift 3 speed transmission.  This unit has been completely reconditioned in our shop and we are a Terex Texoma drill rig dealer.  It has a near new appearance and is job and road ready. The front axle weight is 15,700, the front rear axle is 21,400, the intermediate drive axle is 22,400 and the rear drive axle is 19,100 for a total weight of 78,600.  SR# 3754

2010 Pitman P50-4T, 2010 International 7400 4x4 with a Diesel Engine and an Automatic Transmission with a Pitman P50-4T, Insulated, 50' Sheave Height Digger Derrick.

<p>This is a 60′ Altec D4060A-TR 30,000 lbs digger derrick equipped with a 60′ sheave height, upper controls with pin-on bucket capabilities, pole claws, and riding console, mounted on a 2009 International 7400 6×6 chassis. This has a 7.6L engine with a 5-speed Allison automatic transmission. This truck has extremely low miles at only 84,276 SR# 4368</p> <strong>Vehicle Specifications</strong> <p><strong>Stock Number:</strong></p><p>4368</p><p><strong>Brakes:</strong></p><p>Air</p><p><strong>CA CT:</strong></p><p>142"</p><p><strong>Engine:</strong></p><p>7.6L Diesel</p><p><strong>Front Tires:</strong></p><p>315-80 22.5</p><p><strong>Make:</strong></p><p>International</p><p><strong>Model:</strong></p><p>7400 SFA 6X6</p><p><strong>Miles:</strong></p><p>84,276</p><p><strong>Rear Tires:</strong></p><p>12R 22.5</p><p><strong>Transmission:</strong></p><p>Allison 5-Speed Automatic</p><p><strong>Wheels:</strong></p><p>10 Hole Motor</p><p><strong>Year:</strong></p><p>2009</p><p><strong>Other:</strong></p><p>AM/FM Radio, 2 Bucket Seats, 2 Strobe Lights, 1 Spot Light, 1- 50 Gallon Fuel Tank, Pintle Hitch, Trailer Brakes, Front Bumper Winch</p><p><strong>Front Axle:</strong></p><p>16,000 lb</p><p><strong>Rear Axle:</strong></p><p>20,000 Inter 20,000 Rear</p><p><strong>GVWR:</strong></p><p>56,000</p> <strong>Equipment Specifications</strong> <p><strong>Kelly Bar(in):</strong></p><p>2 1/2</p><p><strong>Material Handling:</strong></p><p>N/A</p><p><strong>Model:</strong></p><p>D4060A-TR</p><p><strong>Mount:</strong></p><p>Center Over Rear Axle</p><p><strong>Out Riggers:</strong></p><p>4</p><p><strong>Serial #:</strong></p><p>0608DE0260</p><p><strong>Work Height:</strong></p><p>60'</p><p><strong>Year:</strong></p><p>2008</p><p><strong>Make:</strong></p><p>Altec</p><p><strong>Sheave Height:</strong></p><p>60 ft</p><p><strong>Other:</strong></p><p>Joystick Controls, Tool Circuits, Hose Reel</p><p><strong>Capacity:</strong></p><p>30,000 lbs</p><p><strong>Hours:</strong></p><p>3,037</p><p><strong>Insulated:</strong></p><p>Yes<br> </p>

<p>This is a 60′ Terex Commander 6060 on a 2008 International 7400 SFA 6×6 chassis. This truck is equipped with a 285 HP International GDT 285 diesel engine backed by a 5-speed Allison automatic transmission, leaf suspension, 5.86 axle ratio & differential lock. The 3-section fully hydraulic boom features a riders seat, 2-speed digger & pole claws.</p><p> </p> <strong>Vehicle Specifications</strong> <p><strong>Year:</strong></p><p>2008</p><p><strong>Make:</strong></p><p>International</p><p><strong>Model:</strong></p><p>7400 SFA 6X6</p><p><strong>Vin:</strong></p><p>1HTWJAAR88J697906</p><p><strong>Brakes:</strong></p><p>Air</p><p><strong>Engine:</strong></p><p>International 7.6L GDT285 (SN- 466HM2U3026389)</p><p><strong>Miles:</strong></p><p>39,499</p><p><strong>Front Axle:</strong></p><p>16,000 lb</p><p><strong>Rear Axle:</strong></p><p>Meritor 18,740 Inner & Meritor 18,740 Rear</p><p><strong>GVWR:</strong></p><p>53,480</p><p><strong>Wheels:</strong></p><p>10 Hole Motor</p><p><strong>Front Tires:</strong></p><p>385/65R 22.5</p><p><strong>Rear Tires:</strong></p><p>11R 22.5</p><p><strong>CA CT:</strong></p><p>154"</p><p><strong>Other:</strong></p><p>A/C, AM/FM/Weather, 1 Bucket & 1 Bench Seat, 1 Strobe Light, 1-50 Gallon Fuel Tank, Pintle Hitch, Trailer Brakes</p><p><strong>Horsepower:</strong></p><p>285</p><p><strong>Transmission:</strong></p><p>Allison 5-Speed Automatic</p><p><strong>Hours:</strong></p><p>9,481</p><p><strong>Stock Number:</strong></p><p>4393</p> <strong>Equipment Specifications</strong> <p><strong>Make:</strong></p><p>Terex</p><p><strong>Model:</strong></p><p>Commander C6060</p><p><strong>Serial #:</strong></p><p>2080435678</p><p><strong>Year:</strong></p><p>2008</p><p><strong>Sheave Height:</strong></p><p>60'</p><p><strong>Kelly Bar(in):</strong></p><p>2-5/8"</p><p><strong>Capacity:</strong></p><p>37,800</p><p><strong>Mount:</strong></p><p>Center Over Rear Axle</p><p><strong>Insulated:</strong></p><p>Yes</p><p><strong>Hours:</strong></p><p>6,423</p><p><strong>Other:</strong></p><p>T-Bar & Lever Controls, Tool Circuits, Hydraulic Hose Reel</p><p><strong>Out Riggers:</strong></p><p>4</p><p><strong>Work Height:</strong></p><p>60</p>

<p><br>This is a 47′ Terex Commander C4047 on 2007 Peterbilt 335 chassis. This Texas truck is powered by an 8.3L diesel engine and a 6-speed manual transmission. SR# 4257</p>

2004 INTERNATIONAL 4300, Digger Derrick Trucks, This is a Pitman PC1549T digger derrick mounted on a 2004 International 4300 chassis. Both rear outriggers have been rebuilt this year.This unit runs and operates well. SR# 2531, VIN: 36211

This is an Altec D947B digger derrick mounted on a 2001 Chevy C8500 chassis. The truck is powered by a Cat 3126 engine and an Allison automatic transmission. This digger has dual operator controls. The truck has low miles and runs and operates well.  SR#3675

2000 INTERNATIONAL S2600, Digger Derrick Trucks, A 2000 International with a 50' height Altec D3050-TR. This desirable working height has stand up controls, a remote control, and upper controls to pin on a bucket. This truck has the locking rear differential., VIN: 1HTGLAET84H223210

1993 FORD F900, Digger Derrick Trucks, with Altec D2050T-R Digger Derrick Vehicle Specifications Year: 1993 Make: Ford Model: F900 Engine: 7.8L 6 Cyl Ford Diesel Horsepower: 225 Front Tires: 11R22.5 Rear Tires: 11R24.5 Brakes: Air Wheels: 10 Hold Bud Rear Axle: 34,000 Front Axle: 12,000 Transmission: 4 speed automatic CA/CT: CT 108" Miles: 59,438 Equipment Specifications Model: D2050T-R Year: 1992 Hours: 7,436 Work Height: 50' Mount: Rear Out Riggers: 4 Insulated: 3rd stage Material Handling: Yes Body Specifications and Dimensions Height: 12' Other: Tool Body Length 16' 5" Length: 27' Width: 98" Material: Steel Toolbox: Yes, VIN:

1991 GMC TOPKICK C8500, Digger Derrick Trucks, Altec D 845 mounted on a GMC Topkick chassis. 44 foot sheave height, 27,000 lb. capacity, pole claws and bed winch. Sold AS-IS, WHERE-IS. Vehicle Specifications Year: 1991 Make: GMC D-845 Model: Topkick Engine: CAT 3116 6.6L Diesel Horsepower: 215 Rear Tires: 11R22.5 (70% tread) Front Tires: 11R22.5 (75% tread) Brakes: Air Wheels: 10 Hole Budd Rear Axle: 22,000 lb Front Axle: 11,000 lb Transmission: Allison MT653 5 spd auto CA/CT: CA = 105 in Miles: 105,987 Equipment Specifications Model: D-845-T Kelly Bar(in): 2 1/2 in Sheive Height: 44 ft Mount: Right Rear Corner Insulated: No Material Handling: Yes Other: Bed winch Body Specifications and Dimensions Toolbox: 9 Material: Steel Hitch: 7 round plug Pintal Style: utility Height: 12 ft Width: 96 in Length: 293 in Other: 2 tool boxes on top, VIN:

This is a Texoma 900 pressure digger on a Hendrickson 805DOH 4-axle carrier.  This unit is a government surplus unit with only 933 hours .  It will drill 80′ deep and can spin a 96″ auger .   This rig has been completely reconditioned in our shop.  We are a Reedrill/Texoma dealer.  This unit is job ready with a near new appearance. SR# 3760

This is a Sterling BT7 pressure digger mounted on a 1985 International S1654 chassis. The truck is powered by a 7.3 L diesel engine and a 5 speed transmission.  The Kelly bar is missing from the pressure drill. This unit is being sold as “PARTS ONLY”. Stock #1411

This is a Texoma 330-25 tracked digger mounted on a Wood Tiger M-4 military tractor. This Texoma pressure digger is powered by a 6V53 Detroit Diesel and a 12000 Funk 4-speed transmission and can drill down to a depth of 25 feet.  The pressure digger has a  3″ kelly bar, rotating & extendable table, a pole setter with pole claws, and a riding console. The M-4 Military tractor is powered by a 453 Detroit diesel with a 10-speed Eaton Fuller transmission. This unit comes equipped with a Gardner Denver 250 CFM compressor. SR# 4050

2018 International 4300, , Used 2018 International 4300 Cummins B6.7 Motor 240 HP 281,800 Miles 25,500 lbs GVW 10,000 lbs Front Axle 19,000 Lbs Rear Axle 7 Speed Auto Transmission 11R22.5 Tires 254" Wheel Base Air Brakes Aluminum Wheels Inner Steel Wheels on Duals 24'x8'6"x8'7" Van Body Dome Light in Box Rear Roll Up Door Power up Gravity Down Rear Lift Gate 70% Tires and Brakes

2013 Freightliner M2106, ,2013 Freightliner M2106 4x4, 70,429 Miles, 33,000 Lbs. GVWR, 14,000 Lbs. FAWR, 21,000 Lbs. RAWR, Cummins ISB Engine, 250 Horsepower, Allison 3500RDS Transmission, 2012 Terex C4047 Digger Derrick, 47 Ft. Sheave Height, 15,000 Lbs. Capacity Turret Mounted Winch, 18 Inch Auger, Insulated 46KVAC Category C, Line Body, Unit Being Sold As-Is/Where-Is, Qualifies For An Extended Warranty!

2016 Altec DM47B-T, 2016 International 4300, Cummins Diesel, Altec Digger Derrick DM47B-TR, 94,805 Miles, Allison Automatic, Air Conditioning, 3 stage digger, 47’ sheave height, 23,790# capacity, riding controls, pole claws, 4 outriggers, front bumper winch/Capstan, pin on bucket. The truck has been serviced and DOT’d. ready to work unit!

2016 Freightliner Altec DC47-TR Digger Derrick, 2016 Freightliner M2 106, Cummins Diesel, Altec Digger Derrick DC47-TR, 76,794 Miles, Allison Automatic, Air Conditioning, 3 stage digger, 47’ sheave height, 25,085# capacity, riding controls, pole claws, 4 outriggers, Multi-Lever Control Station Riding Seat, Five Function Hydraulic Overload Protection System (HOP), Fiberglass Boom Tip and Transferable Steel Boom Flares, Insulating Fiberglass Third Stage, Rated to 46kV and Below, Hydraulic Side Load Protection, 15,000 lb Worm Gear Turntable Winch with Rope Guides, Hydraulic Tilting Pole Guides with Interlock, 12,000 ft-lbs Digger Motor, Two Speed Mechanical Shift, Hydraulic Auger Release, Boom and Auger Stow Protection.