Upfit with MORGAN

18' X 96" Wide X 97" H aluminum van body Note: height and length are inside dimensions, width is outside dimension. Standard overall van body height above the truck frame is the body model height plus 12" . Aerodynamic aluminum front radiuses. Heavy duty, structural, front wall stiffener beam across the front. Tied into the side walls at the top rail. Maintenance free stainless steel rear door frame to prevent rust and loading dock abrasion of paint. Rain trough across the top of the rear door to prevent dripping on product. Premium roll-up rear door with 2" track with larger 2" nylon rollers. 2 of 2 Rear door with stainless steel rivets and stainless steel cables to eliminate rust staining on the door. "E" coated door hinges and hardware to reduce rust. Clamp type brackets for easy replacement of door rollers. Actual rear door opening size: 88" wide x 91" high Translucent roof instead of aluminum. Crossmembers are high-tensile steel "I" beam crossmembers on 12" centers. Stainless steel bottom rail bolts to eliminate corrosion. 'Z'' posts on 16'' centers. .040" thick aluminum panels, pre-painted white. Paint code: Imron N0006HN white. 1-1/8" laminated hardwood flooring with 5/16" floor screws and over lapping joints. Standard floor height from the ground is 9" - 10" higher than the truck frame. 3/8" plywood liner full height on side walls. 1/2" plywood liner full height on front wall. One row of surface mounted "E" track on the side walls, 36" from the center of track to the floor L.E.D. clearance lighting with return ground system . L.E.D. dome light wired to lighted switch in cab. OEM chassis tail lights to be used. Two grab handles, one on each side of the rear door. Mud flaps. Full width dropped step bumper at rear with traction surface. Placed mid way between floor and the ground. No rubber dock bumpers at the rear. Red & white reflective conspicuity tape per FMVSS standards Install OEM back up camera at rear of body.