Gooseneck design Ratchet
Loaded 5th wheel height 52"
84" with 24" flip up and removable gooseneck extension to provide a 108" swing
radius
Power source Hydraulic couplings: 3/4" fixed at front of gooseneck

Deck section design Four beam
Deck section length 22'-6" (22'-0" clear)
Deck section width 8'-6"
Loaded road clearance 5"
Loaded deck height 21"

Flooring 1-1/2" apitong secured with deck screws; no lumber between main beams
Deck/rear bridge connection Fixed/welded
Outriggers 12" swinging/removable with double hook-on at front of deck
Slope front of deck top down With smooth plate & traction bars
1) Removable 32" with smooth plate and traction bars
2) Removable 10'-0" aluminum ramp with storage provisions on gooseneck.
Ramps for use at the front or rear of the trailer
Heavy duty front folding ramps
1) Between main beams - full deck length up to deck boom well
2) Steel plate with large drain holes under winch mount location
Expanded metal

1) Flag holder each side at front with threaded keeper
2) Bucket well, recess last 4 deck cross members in deck between main beams and
cover with 1/4" plate
3) 20,000# planetary winch mounted in between deck main beams approximately
42" rear of gooseneck base section with air clutch and 2 function wireless remote,
100' cable and shackle. Winch mounted below main beams. Cross members
recessed as required to clear winch cable. Hydraulic connection on both driver's
side and curb side.
Additional deck specifications
 

Rear bridge section width 8'-6"
Loaded rear bridge height 29" (Maximum 8" above deck height)
Number of axles 3
Axle spacing 60"
Axle capacity 25,000# - GAWR = 17,500#
Brakes 12-1/4" x 7 1/2" air actuated with NO spring brakes

Wheels Eight (8) stud steel disc hub piloted system with oil seals
Tires Twelve (12) 245/70R17.5 (J) 18PR Michelin radials
Suspension Ridewell air
Exhaust Valve Manual
1) Talbert +3",-3" with over ride chains on all axles
2) Knob style hand valve (+3,-3) raising and lowering
3) Air lift on axle 3
Manual raising & lowering (+3"/-3")
Suspension options Right Weigh digital scale
Rear Bridge Center Section All cross members recessed
Wide center bolster Yes (Same height as deck height)
Front bridge ramp Bump up ramp in front of first axle
Beavertail 5'-0" horizontal beavertail (Same height as deck height)
1) Flag holder each side at rear with threaded keeper
2) Rollers as required for winch operation
3) Removable snatch block located at rear of trailer


32 total -
11 each side of deck (bent style), 22 total
1 each bolster end (straight style), 4 total
2 each side of beavertail (bent style), 4 total
2 at rear of trailer (bent style), 2 total

Estimated empty weight 23,160# without aluminum ramps